Goggles Pizano's latest activity
-
GGoggles Pizano reacted to luc's post in the thread Trim Screw 06035625 Junkyard Scavenging with
Like.
Give me your address and i will mail you 1 -
GGoggles Pizano replied to the thread Transmission Fluid for G1 & G2.Read sticker on tranny. Do not use synthetic oil. I posted this on multiple threads here and there is tons of threads about this
-
GGoggles Pizano replied to the thread Wanted Gen1 fuel line.I was liking at that dorman kit. Then you can do any fitting you want.
-
GAfternoon all, we are closing in on the day Blucifer will once again roam the streets of Florida. Gearhead continues to finish up line...
-
GGoggles Pizano replied to the thread My old car already up for sale.Sold and being shipped to buyer.
-
GGoggles Pizano replied to the thread FS: 2001 Dodge Viper ACR Yellow w Black Stripes - 24.5k Miles - Miami FL.You missing posting an asking price.
-
GThere never was a Viper built in 2007. Next, you can find plenty of discs available, but you need to confirm some basic counts and...
-
GGoggles Pizano replied to the thread Tom's 40mm rear caliper upgrade.There is a lotus wiki on this too.
-
GGoggles Pizano reacted to Steve-Indy's post in the thread Tom's 40mm rear caliper upgrade with Like.
As I recall, Tom's original 40mm kits used a sleeve on the 36mm piston to bring it up to 40mm. For those interested, Tom had full...
-
GHey Chamberlin, I’m in Nashville too. You’re welcome to checkout the ‘99 ACR to understand the A/C or whatever else. We have a good shop...
-
GGoggles Pizano replied to the thread New gen ii ACR owner - shifter stiff?.What you doing with the Hurst?
-
GGoggles Pizano reacted to BoondocSaint's post in the thread Control Arm Bushing Up-Grade-... with Like.
Like GTS Dean pointed out, tightening down on those bushings at full droop is a no no. Using a jack to move the suspension to it's...
-
GI will only add that YOU can maintain your own Viper...very easy to do on a Gen II, and not bad on a Gen V once you remove a more...
-
GGoggles Pizano replied to the thread Tom's 40mm rear caliper upgrade.You take the stock rear single piston caliper and disassemble it. Then you bore the caliper from 36mm to 40mm. Put in a new 40mm...
-
GI did Tom's 40mm kit 20+ years ago. I pulled the prop valve spring and still run 13" rotors all around. It stops like mad with great...
