GTS Dean's latest activity
-
I took the car in to have the toe set this morning before a track weekend at COTA. This spring was on the Driver's floor next to the... -
-
Working on a new Splitter
-
Give me your address and i will mail you 1
-
GTS Dean reacted to thomasmk's post in the thread Window Regulator -GEN 3/4 Archilles Heel with
Like.
Hi Steve (and the other readers), thank you for your help. It's been a long time since I posted - however, I think I should give some... -
Use a good 75w-90, just avoid GL5 rated fluids. I used anything I had on the shelf, 2qts redline GL4, 1qt BG synchroshift, 1qt auto...
-
GTS Dean replied to the thread Transmission Fluid for G1 & G2.The Gen 1s had different blocker rings in the synchros and require a Dexron III or better ATF fluid. The Gen 2s have carbon rings and...
-
GTS Dean reacted to Ramtuff's post in the thread At running temp, car acts like its in neutral, in any gear including reverse with Like.
Pressure plate is probably sticking open when hot or slave is sticking holding it open.
-
Afternoon all, we are closing in on the day Blucifer will once again roam the streets of Florida. Gearhead continues to finish up line...
-
GTS Dean replied to the thread Question about brakes.There never was a Viper built in 2007. Next, you can find plenty of discs available, but you need to confirm some basic counts and...
-
-
As I recall, Tom's original 40mm kits used a sleeve on the 36mm piston to bring it up to 40mm. For those interested, Tom had full...
-
GTS Dean replied to the thread Tom's 40mm rear caliper upgrade.No. Gen 1 and Gen 2 thru 2000 all use exactly the same Brembo single piston floating caliper. 01-02 ABS models were very slightly...
-
I will only add that YOU can maintain your own Viper...very easy to do on a Gen II, and not bad on a Gen V once you remove a more...
-
[email protected] I bought a set and have had them on for about a month. Coincidentally, I just sent my cores back today.
-
GTS Dean replied to the thread Trim Screw 06035625 Junkyard Scavenging.Here are OE fastener supplier links: https://www.auveco.com/ https://www.clipsandfasteners.com/default.asp https://belmetric.com/
-
GTS Dean replied to the thread Tom's 40mm rear caliper upgrade.I did Tom's 40mm kit 20+ years ago. I pulled the prop valve spring and still run 13" rotors all around. It stops like mad with great...
-
Latest posts
-
-
-
-
New 99 RT/10 owner, few questions on issues/coilovers.
- Latest: Goggles Pizano
-
-
-
-
