Search results

  1. S

    Introduction date on the new Gen V pirellis ?????

    With the supply of Pilot Sport Cups drying up faster than the crops in the Midwest, has anyone heard when the new Pirelli's are coming out? Now before everyone says "when they start building the new Vipers", keep in mind they are building them now. Maybe not at the full production capacity, but...
  2. S

    Help Diagnosing Noise form Rear

    I checked my Motons just now and I cannot see anythreads showing by my top mount. To truly see what is loose get BOTH rear wheels off of the ground at the same time so the the suspension can sag equally on both sides AND the preload springs can extend. jack on the frame to allow the wheels to...
  3. S

    Changing oil- Don't make the same mistake I did

    Bless me Father for I have sinned....
  4. S

    Hoosier A6 or Kuhmo V710

    Kumho made it easy for you. They stopped making the the Viper sized tires, at least the gen 3/4 rear sizes.
  5. S

    Hurst Shifter install

    What is happening is the shifter shaft (say that 3 times fast) is rubbing on the underside of the sheetmetal that forms the top of the trans tunnel when you go to shift into reverse. If you lightly bump the metal up, It will make allof the difference in the world. My coupe has a urethane trans...
  6. S

    Hurst Shifter install

    I did mine from the top AND I DID remove the console
  7. S

    Hurst Shifter install

    It took about 2 hours per car start to finish. I wasn't in a hurry and I wanted to make sure I didn't ding the console getting it out or putting it in. The vert was easier as I had the top down.
  8. S

    Hurst Shifter install

    Give it a bit of time it will loosen up. I have one on each of my Gen 3's and had the same experience with both. They are great now.
  9. S

    Increasing rear brake bias on track only Gen3...

    The short answer is yes. We can discuss this more off line. PM me your contact info Steve A.
  10. S

    Increasing rear brake bias on track only Gen3...

    Here is my setup. I have an '06 coupe w/Gen 4 aero on it. I have Motons w/1200 rears and 700 fronts. 1st Gen comp coupe sway bars and hoosiers. I have Mintex front pads with Brakeman 3's in the rear. I was at Road America w/NARRA and had no problems with my brakes all weekend. They were able...
  11. S

    Suspention issues, Advice needed

    I have a Gen 3 and I am running 1110 rears and 700 fronts with solid sway bars (stock configurations)
  12. S

    Suspention issues, Advice needed

    The issue isnt necessarily ride height but spring rate and sway bar size. It sounds like there is quite alot of body roll/weight transfer to the outside rear corner of your car when tracking it. The only way to eliminate it is to up the spring rate and even upsize the bars. Steve
  13. S

    Trunk struts

    Are they a different length or are they higher pressure to be able to hold the deck lid up?
  14. S

    question for enclosed trailer owners

    27' V-nose here. I converted from an 18' aluminum open trailer.
  15. S

    We had a great time on the Indy Spring Cruise

    I wanted to say thanks to Nancy and Larry Friend and Kim Peterson for putting together the cruise to Indy this past weekend. I had a great time seeing the sights, but also as it is with the multi day cruises, getting better acquainted with the club members you don't see that often. Thanks...
  16. S

    To sell or not to sell?

    Yeah Ditto on the above. Gen 2's have better parts availability than some of the Gen 3/4's.
  17. S

    replacing rubber shift boot

    take the belly pan off of the bottom, the rivet nubs will fall out reinstall belly pan.
  18. S

    Wanted: Autoart Viper

    What one do you want? there were 14 different models made I believe. Not all of those were imported into the States.
  19. S

    Thought I fried my ECU yesterday...

    Your ASD relay may be on its last legs... Mine did the exact same thing just before the relay gave up the ghost. Order them thru Dodge by the part number on the top and you wont get taken to the cleaners. They were like 11.00. If you notice in your fuse box, there are several others in...
  20. S

    Sent my 04 Mamba into tree.

    Sorry to see that... Glad you are OK though.
  21. S

    I done seen it all now!!! Suspenders on a car!!!

    DANG IT!! You beat me to the punch. That's exactly what I thought the moment I saw it.
  22. S

    Gen 3 Cat Catastrophe

    Are there any mods to your car? I have never heard of all 4 cats going at the same time... I think someone is feeding you a line.....
  23. S

    Engine rebuild in Chicago

    Give Roanoke Motors a call... I and a ton of other Ill club members have had lots of work done there. An absolute top notch Viper dealer and service center. Give John Gastman a call there.
  24. S

    My 2004 snake for sale - IL

    Sent you a pm regarding the wheels Steve A.
  25. S

    Hoosier R6 vs. Pilot Sport Cup

    whats the differnce between the A6's and the R6's?

Latest posts

Members online

Total: 1,076 (members: 2, guests: 1,074)

Forum statistics

Threads
153,566
Posts
1,684,648
Members
18,130
Latest member
Andyk753

Share this page

Top