Search results

  1. S

    Motive Pressure Bleeder or Speed Bleeders?

    Does anyone know what the proper cap part # is for a Gen3/4 car?
  2. S

    WTB: aftermarket roller rockers, radiator, guage pod

    SnakeOyl has the radiator and hoses that fit, work well, and last a long time. Give Cory a call. When I last checked, all of that was a normal stock item.
  3. S

    Clutch release bearing

    It is just an upgraded part from the original. I just installed that exact part on my car. Works perfectly! No worries.
  4. S

    Rear suspension link bushing

    +1 on the SnakeOyl ones...
  5. S

    GoPro Hero 3-Black

    I have a Go Pro Hero 2. I took one of the self adhesive mounts and put it on top of the bulkhead in my coupe and it works well.
  6. S

    Pedal adjustment switch broke

    Yea, both of my cars broke also. I got mine from SnakeOyl as they were an exact match of the originals. Made of a much better material than the others. Save your screws though, as those tri lobe screws from Chrysler are almost $6.00 a piece and weren't even available when my housings broke and...
  7. S

    Rear wheel breaks off!!!

    Not anywhere near the Gen 3/4 cars. SnakeOyl does make a Gen2 version of the toe link supports for those who want peace of mind... Steve A.
  8. S

    Engine section?

    Bravo Dan, Very well put. Steve A.
  9. S

    Looking for Gen 2 Chrome-Moly Flywheel

    Does anyone have a Gen2 aftermarket chrome-moly flyweel they would like to sell? Pics and price would be awesome. Steve A.
  10. S

    gen3 stripe question

    100% agreement. All stripes had a "lip". The car are factory painted. they then go to Prefix where the factory paint is scuffedin the area to accept the stripes. After the stripes are painted, the entire striped body panel is re-clear coated, thus the lip.
  11. S

    gen3 stripe question

    Au Contraire mon ami.... ALL FACTORY striped Vipers are PAINTED. No vinyl has been used. I have an'06 VCA coupe red w/white stripes 1of 50. They are all painted. The first edition coupes are painted also. If you have a vinyl striped Viper and are told "its factory" it ain't so... The factory...
  12. S

    ACR-X Brakes

    The brembo brake calipers are the same as the street car. The brembo rotors are a bolt on 2 piece floating rotor. Again a direct bolt on from stock. They are very pricey. Some folks swear by them, some swear at them. If you want a pocket book friendly 2 piece rotor, consider the StopTech Aero...
  13. S

    the best brake system for srt10

    Slotted rotors yes... Dimpled or cross drilled no.
  14. S

    Rear wheel breaks off!!!

    If I remember correctly he was in excess of 140. It doesn't need to be any thicker. It worked as designed. Its there as a "safety net" only. You dont seem to understand. IT WORKED. HE SAVED THE CAR. It is not meant as a replacement for the casting. There are thousands of Gen 2-3-4 vipers...
  15. S

    Rear wheel breaks off!!!

    Here are a couple of pics of a comp coupe that had a very high speed off track excursion. This car has the toe link kit installed. You will notice that the toe link reinforcement is bent, but it kept the wheel straight and not turned into the wheel well like the unfortunate OP. The driver...
  16. S

    Window Regulator -GEN 3/4 Archilles Heel

    I looked up the companies website and saw that they collaborate with Peugeot, Citroen. That might explain the Made in France tag on the motor. The other thing I found was: Plastics in Lightweight Vehicles 2012 Conference Inteva Vice President and Executive Director, Interior Systems Pat...
  17. S

    Well, that's unique...anyone else seen this before?

    that frame has been on Flea-Bay several times. They seem to change the description a bit each time.
  18. S

    NARRA 2013 schedule

    There was a Road America event on the schedule but that disappeared after the new owners of NARRA took over and moved evrything east. I understand about the west but the midwest always seemed to bring out a crowd.
  19. S

    295/30 18 PS2s up fornt?

    That is the size that I run when I have to run street tires during my track days. The car drives very well. (my opinion) It works better that the stock sized PS2's. I have found them cheaper from time to time that the viper spec 275 PS 2's. Thats what made me try them initially.
  20. S

    Diff Cooler temp switch needed

    The fans and the pump turn on and off together. The temp switch only controls the ground for the system easier on the wires that way...
  21. S

    Diff Cooler temp switch needed

    It is official. The switch that comes with the ACRX's and with the retro fit kits from Tom F. (P5154012) has been offically discontinued from Dodge w/o replacement. I do not know what the racers are going to do when their switch goes TU. Can you guys help all of us out? I have a car that...
  22. S

    Diff Cooler temp switch needed

    It is official. The switch that comes with the ACRX's and with the retro fit kits from Tom F. (P5154012) has been offically discontinued from Dodge w/o replacement. The nice suggestion I received about a coolant temp switch is that they do not function well over the long haul in oil. That comes...
  23. S

    Diff Cooler temp switch needed

    Hi, I am in the process of putting in a diff cooler in my car very similar (if not exactly) like the ACR-X cooler. The problem that I have run into is the switch to control the oil pump. The factory part number is P5154012 but there are no assets anywhere and none in the pipeline. It is a...
  24. S

    Diff Cooler temp switch needed

    Hi, I am in the process of putting in a diff coller in my car very similar (if not exactly) like the ACR-X cooler. The probelm that I have run into is the switch to control the oil pump. The factory part number is P5154012 but there are no assets anywhere and none in the pipeline. It is a...
  25. S

    Diff Cooler temp switch needed

    Hi, I am in the process of putting in a diff cooler in my car very similar (if not exactly) like the ACR-X cooler. The problem that I have run into is the switch to control the oil pump. The factory part number is P5154012 but there are no assets anywhere and none in the pipeline. It is a...

Latest posts

Members online

Total: 1,013 (members: 2, guests: 1,011)

Forum statistics

Threads
153,566
Posts
1,684,648
Members
18,130
Latest member
Andyk753

Share this page

Top