If I'm paying for a Viper, I'm paying for each and every HP that it should have, and I want to be able to use it as I see fit, when I see fit to do it. In this case, the computer seems to be overstepping its bounds for little to no reason, and needs to be addressed with a software patch or...
No need to disconnect anything to install the canisters...as already stated, removing the inner fender liners will let you fish the canisters to the right places both front and rear.
It's some sort of textured soft-touch coating, and it isn't very durable. It can be pulled and re-coated, but it isn't the most fun piece to wrestle out of the car. Doable, but not fun.
Same question, and one more: do you need to modify the heads for whatever torque limiting fasteners are used, or can you get away with unmodified Gen 4 heads and careful tightening?
The only cars that I've seen with tinted windshields were show cars (or at least used primarily for that purpose). I'd think it would generate a lot of interest from the cops, not that a Viper doesn't already do that. That would make it not worth it to me.
It should move some, unless solid motor and transmission mounts are used.
It should shift a fair amount with rubber mounts, and a bit less with poly (probably about half in my experience).
Start with the easy stuff...bleed the clutch fluid first, change the transmission fluid next if that hasn't been done in a while.
One of the biggest culprits of hard WOT shifting is the clutch not fully disengaging...aftermarket clutches seem to have this problem more than OEM ones do...
Why? Because it has functional air conditioning, cruise control, and government mandated traction/stability control?
The magazine guys are still all afraid to drive it...sounds like they kept the Viper's soul to me.
I don't think it would matter to be honest...I think as soon as you crack the bleeder screw, fluid comes out the end as well as around the threads, hence why you get so much fluid dripping out the bottom of the bell housing.
At least that's been my experience.
I've used Ate Typ 200 DOT 4 fluid in the past, but if Motul 600 is available at motorcycle shops locally, I might try that instead since I always have to order the Ate fluid.
As has already been stated, the issue is the tire size...manufacturers just don't make all season or winter tires in sizes that you see on a Viper (the 345 rears especially). Summer rubber compounds get hard and slick at anything below about 40-50 degrees, so that will be your limiting factor...
I installed what's in my signature block, and ran new speaker wires since it wasn't too difficult. The Kenwood amp I used fits under the passenger seat in place of the factory amp.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.