Search results
-
Looking for an inner door stanchion
My passenger side inner stanchion cover has a crack at one of the ***** holes. Being somewhat **** I wanted to replace it. To my surprise I found a supplier on ebay. (x2 builders) who appeared to be re producing them from the original Mopar molds. As the picture on the listing clearly shows the...- GA- Viper
- Post #9
- Forum: RT/10 and GTS Discussions
-
Gen 1 Headlight Switch Issue
My 95 with 8,500 miles is rarely driven that I have need for the headlights and the headlight switch has not been used in close to a year. Last night I had no headlights, or tail lights but the brake lights worked. I moved the headlight switch in and out numerous times and finally got them to...- GA- Viper
- Thread
- Replies: 1
- Forum: RT/10 and GTS Discussions
-
Needed- Rear Bumper Bolt
Needing a rear bumper cover bolt. One of the 12 along the bottom edge. It is a M6 SEMS bolt. It is long since not available from any dealer. And there is no after market equivalent as it is a coarse thread and not the typical M6 1.0 fine thread. One Viper parts vender has them for $23 for ONE...- GA- Viper
- Thread
- Replies: 0
- Forum: RT/10 and GTS Discussions
-
Pantera vs Viper Driving Experience
I have owned 2, 1972 Pre- L Panteras. The last one I owned for 25 years and sold several years ago. I love these cars. The styling is timeless, the mid-engine and low center of gravity make for great handling. And performance even in stock configuration is very good, and being a Ford 351...- GA- Viper
- Post #2
- Forum: RT/10 and GTS Discussions
-
Looking for viper GTS
Wow Slug exactly what I’m looking for. And a fair price. But unfortunately it would likely cost $3K to get shipped to Atlanta☹️- GA- Viper
- Post #3
- Forum: RT/10 and GTS Discussions
-
1993 Gen 1 good news.
There is also a 5% Buyers fee on top of the high bid. The car’s condition is good, not excellent. The flocked dash is horrible. With the hard top included it is about right in today’s market. Last year when I bought mine this car would have been about $ 27K. So I think the market is definitely...- GA- Viper
- Post #8
- Forum: RT/10 and GTS Discussions
-
Viper Red Paint
Robert, Thank you for the great information. That helps me better understand why the color looked perfect on the touch up paint applicator but dried so much darker. The paint I had made is a perfect match. And was mixed as a base coat with a separate clear coat application.- GA- Viper
- Post #7
- Forum: RT/10 and GTS Discussions
-
1993 Gen 1 good news.
DJ If that was true I will sell mine for 1mil.LOL Anyway you can always ask whatever you want when selling anything. But it is only worth what someone is willing to pay for it. Good luck with your sale and hopefully you get what you are asking for it as it would help the values of all of our...- GA- Viper
- Post #4
- Forum: RT/10 and GTS Discussions
-
Intro and Parking Brake Assembly
Sorry to the original poster and don’t mean to hijack his thread. But I’ve had the same issue without realizing it as Alex. Five minute fix. With most of that re shaping the thin metal boot cover to fit back securely. FYI when removing the boot cover push in from the sides, not the top or bottom...- GA- Viper
- Post #10
- Forum: RT/10 and GTS Discussions
-
Viper Red Paint
Hey DJ, Thanks for the reply and your pics. I heard also that there were changes in "Viper Red" paint suppliers to Chrysler over the years. Not just with their touch-up paint , but also during the original production of the cars. So getting a correct match of the Mopar touch up paint is...- GA- Viper
- Post #3
- Forum: RT/10 and GTS Discussions
-
Viper Red Paint
Hello all, I am trying to do some touch up of a few small chips on my 95.The original paint code was LRN. Which per the Mopar color charts is now PRN. I ordered factory Mopar PRN touch up paint but it is noticeably darker than the red on the car. The car is all original paint always garaged and...- GA- Viper
- Thread
- Replies: 11
- Forum: RT/10 and GTS Discussions
-
Switched Insurance
Thankfully, I have not had to make any claims with my time with Infinity. So I can not speak to their handling of claims. However, my research at the time found them to be highly rated in all areas including claims. Just another FYI and I do not know if this applies to all insurance companies...- GA- Viper
- Post #22
- Forum: RT/10 and GTS Discussions
-
Switched Insurance
I had Hagerty for several years with my Pantera. Shopped rates and found numerous companies with stated value for a lot less. Currently with Infinity Insurance and is half the cost of Hagerty. Maybe it’s the cost of their nice magazine if still available.- GA- Viper
- Post #19
- Forum: RT/10 and GTS Discussions
-
Shift Knobs
In the first year with my 95 Gen 1 the one thing I have not liked is the OEM tall pistol grip shifter. I like the no longer made MGW Gripper. And apparently some old MGW stock sans the Viper logos is sold by a Viper vendor. I did come across the factory OEM ACR shift knob which is a little...- GA- Viper
- Thread
- Replies: 0
- Forum: RT/10 and GTS Discussions
-
MGW Gripper Shift Knob
Looking for an MGW Gripper Shift knob for a Gen1. Please PM Thanks- GA- Viper
- Thread
- Replies: 0
- Forum: What'cha Need for Your Snake?
-
Hood Gap
My 95 suffers from what I have researched the fairly common problem on Gen 1/2 of hood to fascia fitment. The gap at the side of the fascia (just in front of the wheel well) ) to the hood on the passenger side is larger than driver's side. I have forum researched countless old threads discussing...- GA- Viper
- Thread
- Replies: 4
- Forum: RT/10 and GTS Discussions
-
RT/10 Exhaust - Open Headers and Custom Pipes
Wow J !, Those race mufflers sound just about as loud a the open headers. They do sound awesome. But,no way I could live with that. I do early morning weekend drives and my neighbors would kill me. Hoping you could provide contact info for the shop. Hopefully, they have some other options to...- GA- Viper
- Post #9
- Forum: RT/10 and GTS Discussions
-
RT/10 Exhaust - Open Headers and Custom Pipes
Good to know about the O2 sensors. Curious about the need for ceramic coating if the shop just uses stainless material ?- GA- Viper
- Post #6
- Forum: RT/10 and GTS Discussions
-
RT/10 Exhaust - Open Headers and Custom Pipes
Hey J I have a 95 purchased last spring. Love the car but the stock sound is pretty sad. Some research says high flow cats will dramatically reduce the sill heat. I am also in metro ATL and know we no longer need to deal with emissions. But thought maybe the high flow cats would still be a good...- GA- Viper
- Post #4
- Forum: RT/10 and GTS Discussions
-
1993 Viper Dash
I recently purchased a one owner 95 with only 7,700 miles. Pristine condition with the plastic still over the carpets. The dash however, has numerous scratches/scuffs. And I quickly learned any attempt to clean it only makes it worse. I really would like to keep it original but my research so...- GA- Viper
- Post #26
- Forum: RT/10 and GTS Discussions
