Search results

  1. G

    '98 Roe Viper. 1st time to the dragstrip with this car!

    I guess anything faster than a 11.49 I need a cage?? Or a fire jacket?? Something like that. They gave me a warning threatening to kick me out if I go under 11.49 when I ran a 11.386 @ 125.86 with a 1.741 60'. I told them I wouldn't do it again buuuutt I did. :drive:
  2. G

    '98 Roe Viper. 1st time to the dragstrip with this car!

    Thank you! It's a bit bitter sweet as I wanted to see 10's but it was a good shakedown. Next time I think a 5000rpm launch and some colder temps will do the trick :D
  3. G

    '98 Roe Viper. 1st time to the dragstrip with this car!

    Hey all. So I sold my Gen 3 SRT10 to get into this '98 Viper GTS with the Roe Supercharger. It has a 8lb pulley and water/meth injection and that is it! I'm still on factory headers/exhaust. It made 573whp/580wtq. This is the result of my first time out with the car on the drag strip! I was...
  4. G

    HRE 540R's... What are they worth?

    Yeesh! I'll just keep these lol
  5. G

    HRE 540R's... What are they worth?

    8/10. No scratches or scuffs or nicks of any sort. Probably could use a good polishing or powdercoating
  6. G

    HRE 540R's... What are they worth?

    Nobody? :(
  7. G

    Am I making what I should be making?

    He did both of these as he wasn't sure about how much timing to add. He added a wee bit of timing, did a dyno pull, then pulled the plugs to inspect. Put the plugs back in and do it all over again until the car stopped making power, then he pulled timing to where it would make max power and...
  8. G

    HRE 540R's... What are they worth?

    I'm debating on selling my wheels as I'd like to go with the Gen 3/4 wheels. However, I've no idea on how much I should be asking for my wheels as I was never a "wheel guy." I believe the wheel sizes are 18x11 and 18x13. 285/35/18 up front, 335/30/18 at the rear. Rims come with matching Viper...
  9. G

    Am I making what I should be making?

    Total of about 50 pulls (give or take a few) on the dyno. Initial dyno was 480whp when I got the car so I am happy with what it made haha
  10. G

    Am I making what I should be making?

    Well poo. Kind of sad to see the car not making what it should be :/. At least she drives well!
  11. G

    Am I making what I should be making?

    Hmmm... Can I gain 62whp with 1.7 rockers, 70mm throttle bodies, headers, and exhaust??
  12. G

    Am I making what I should be making?

    Here's my dyno sheet. AFR's were solidly holding 11.5:1 all across the board. Very happy with how it drives! Another thing is that this is that my tuner is completely new to Vipers. He's a friend of mine and he owns Richtuned and he offered assistance in tuning. He didn't know much about the...
  13. G

    Am I making what I should be making?

    No cats, just testpipes. 91 octane. I figure with headers/exhaust, I would break into the 600's
  14. G

    Am I making what I should be making?

    Hey all! I have some more questions to ask lol. After replacing my fuel pump, I was able to get the car tuned with great success! :) I'm very happy with the numbers but I just want to make sure that I am making what I should be making. My mods are: 2.4L Roe Supercharger, 8lb pulley...
  15. G

    Fuel pump DIY??

    Changing the pump was actually really easy. Just got past those 4 rivets, pulled the whole thing out, and replaced the pump! I already had a 255lph Walbro in there that was just not enough. I replaced it with Lethal Performance's Stryker 360lph fuel pump which is a direct replacement of the...
  16. G

    Fuel pump DIY??

    Thank you!!!
  17. G

    Fuel pump DIY??

    I've used the search bar but I can't seem to find any diy on replacing a fuel pump. Friend of mine works at a shop and he says we have to drop the tank to get to the fuel pump vs I remember someone saying you can get to it from the top??? Can anyone set this straight? I have a '98 GTS
  18. G

    VEC2 tuning issues. Not getting fuel???

    Thank you! I went with this fuel pump. http://www.lethalperformance.com/03-04-svt-cobra/fuel-delivery/fuel-pumps/divisionx/divisionx-stryker-340lph-fuel-pump.html
  19. G

    VEC2 tuning issues. Not getting fuel???

    What is the fuel pressure supposed to be for a Gen 2 Roe S/C??
  20. G

    VEC2 tuning issues. Not getting fuel???

    I think you're 100% correct. A friend just so happens to have a 340lph fuel pump. Would this be big enough? Using the VEC2, we're only at 70 out of 200 so we're only at 35% duty cycle. I haven't looked into fuel pressure but more and more it seems to be the fuel pump.
  21. G

    VEC2 tuning issues. Not getting fuel???

    The car has a 255lph Walbro if I recall correctly
  22. G

    VEC2 tuning issues. Not getting fuel???

    Hey all. Today after 5 hours of tuning, we called it quits because the car simply isn't getting fuel past 4000rpms. It made 3 successful pulls and it made 545whp/599wtq without water/meth injection but soon after, the car kept leaning out past 4000 rpms. We'll dump fuel in for 4k+ in the VEC2...
  23. G

    Pics of My Lemke 3-Piece, Finally! Lol!

    That looks great! I like that its completely flush
  24. G

    Got some professional shots done :)

    Thank you all! Car is not lowered at all. I plan on going with a 345/35/18 tire to fill up the rear and possibly lower just an inch just to finish the look! :)
  25. G

    Got some professional shots done :)

    Good friend of mine took some shots of the Viper :). Now I just need to lower her just a tad bit!

Latest posts

Members online

Total: 1,184 (members: 8, guests: 1,176)

Forum statistics

Threads
153,662
Posts
1,685,348
Members
18,254
Latest member
Puntacanaviper

Share this page

Top