Search results

  1. R

    For those with SCT Programmers.

    Again, Thanks Dan for the info. I look forward to the write up that you say you are going to do from your earlier post.
  2. R

    Programmers and calibrations

    Thank you Dan.
  3. R

    K & N oil filters

    I use the K & N HP2004 all the time and have used their filters on all kinds of street and race engines for 20 years. never have had a problem. The nut is a great feature when it comes to removing the old filter.
  4. R

    Exhaust?

    Everyone will have a different opinion as each person likes a exhaust to sound a different way. if you do a search for exhausts on these forums you will find hundreds of post and a lot of great information. Before you buy go to a viper show and listen to the exhaust and see if you like the way...
  5. R

    four wheel alignment

    In general it is always a good idea to do a 4 wheel thrust alignment whenever you are installing new wheels or tires. The money spent is cheap insurance compared to the money you have outlaid for new tires, mounting and balancing.
  6. R

    PCM Idle RPM Amnesia

    Fast Too: I have also had the same problems that you describe above with my modded viper. I have the DC ECM tune on mine among other mods so I do not think it is the IAT sensor. I believed the problem was caused by old gasoline that had been sitting in my viper for about 6 weeks when I...
  7. R

    Engine "woke up" after 3600 miles

    I can not vouch for the viper but I have a Mazda Miata Hardtop for a daily driver. I was told when I bought it that at 3000 miles it would have a huge increase in power. I questioned the service manager and he showed me a bulletin that stated that the ECM was programed to reduce horsepower until...
  8. R

    Adjusted my headlights, WOW, what a difference

    Great info and pics, thanks.
  9. R

    For those with SCT Programmers.

    Thank you Dan. I am assuming that the price of $699.00 is for a new setup from you. how much for customers that have already purchased a flashed pcm from you? What special pricing for the handheld programmer is offered to us that already have the DC Tune and thermostat?
  10. R

    updates Chuck???????????????

    I would also like to add that Jon at The Parts Rack and Dan at D.C. Performance have also been wonderful and very supportive whenever I have spoke with them as have Chuck Tator. These people are a great asset to the viper community and Chrysler should wake up and see the light. Thanks guys.
  11. R

    Viper Map

    You are not crazy, I believe it was in an old viper magazine.
  12. R

    rich guy w/ Viper steals g friend

    You have that right! I owned a Ferrari for 2 years and all I ever got were the gear heads looking at it. After buying the Vipers girls go crazy over it all the time. The viper is an American icon!
  13. R

    battery

    Mike and Juli, here is the battery tender I have been using for years on our farm equipment. I am going to install one of these near the battery in the rear of the viper or under the hood connected to the circuit breaker box. Summit SUM-1214CC...
  14. R

    Srt K & N Filter-charger Replacement Filters

    Thank you Rick, ( Yelloh), I had my viper out Sunday and put about 150 miles on it. What a perfect day!
  15. R

    Viper Map

    There used to be a section on the old forums called the viper registry. I have not been able to find it here on the new site.
  16. R

    For those with SCT Programmers.

    Can you provide us with what that price would be and what we need to do to our flashed ecm to be able to use the handheld programmer? Does the programmer have the stock program in it or will we need to install a stock ecm to use this new handheld programmer? What adjustments can we make with...
  17. R

    2008 Mopar Performance Parts

    The reason they are the same part number is that Borla gives you the option of retaining your crossover or eliminating it and using their included side pipe tips.
  18. R

    SRT-8 Jeep front door hinges

    Same problem on my 2006 Grand Cherokee Overland. Cleaned all the lube off the hinge and it helped some.
  19. R

    Tilton Clutch Heavyweight Flywheels!

    Why I can not comment on the Tilton Carbon Clutch for vipers I can tell you that Tilton makes great products. We have been using them for years on our NASCAR race cars. they bare well engineered and flawlessly built.
  20. R

    Outside of Windshield treatment

    Me too. Vipers were made to be driven even if it rains. I was even caught out once in a snow flurry earlier this year! :omg:
  21. R

    four wheel alignment

    Not to stir any feathers here but I would want to be right there when whatever shop you use is doing the 4 wheel thrust alignment. It is very important to make sure they install the thrust plates under the rear wheels if they are not built in to their alignment lift. Assuming your viper is stock...
  22. R

    updates Chuck???????????????

    i have to commend ViperDude for having the guts to speak his mind. We should not condemn him here as everyone has a right to their opinion even if we agree or disagree. Great opinion ViperDude!
  23. R

    rich guy w/ Viper steals g friend

    Got to love it! now i know why I love Starbucks!
  24. R

    Looking for a maintenance lift, not storage

    If anyone wants to they can check out my Bend-Pak lift that is in my shop in Branford, CT. If you like you can try it out with my viper or another car.
  25. R

    battery

    First off what i stated above is a fact, I have my original battery still in mmy viper after 5 years and 23,000 miles. if you have an y doubts why don't you proove me wrong by looking at my battery and checking its serial and manufacturing number. Second, all seals will get a set to tem if...

Latest posts

Members online

Total: 1,965 (members: 8, guests: 1,957)

Forum statistics

Threads
153,663
Posts
1,685,356
Members
18,254
Latest member
Puntacanaviper

Share this page

Top