Search results

  1. J

    Starts and dies

    Sounds like the exact same thing that happened to my 2000 RT/10 last year. I would take a look at the EEML. I is most likely the unit or one of the input signals that manage the security system. A common input signal that fails is the hood switch. Take a look at the shop manual if you have one.
  2. J

    Mopar Cruise In 5/17 - Carrolton, TX (10-2pm)

    This event is on again for 2015.
  3. J

    Couple of pics of my ACR

    Had the opportunity to have my ACR professionally photographed.
  4. J

    Southwest Zone Rendezvous

    SWZR information has been sent out via our Yahoo Group email list and is also posted on the South Central Region forum area. http://forums.viperclub.org/threads/667629-race-weekend-September-19-20-21-22-in-Austin Deadline is short, so if you are interested don't wait around too long. There are...
  5. J

    Southwest Zone Rendezvous

    I just posted the following to the NTVCA Yahoo Group: Sounds like the South Central Region has got the details worked out for the SWZR along with access to the ALMS race in conjunction with SRT. Ben Keating and RSI are lined up to be sponsors so this should turn out be a great event. If you...
  6. J

    Now available gen 3 viper power steering line replacements

    The product description says "For off-road use only" - what does that mean exactly for a power steering fluid line?
  7. J

    Voi 12 texas caravan

    There are a few guys headed out from DFW area probably on Wednesday AM. Tentative plans on hitting the TOD on Thursday morning then into Charlotte by mid-afternoon.
  8. J

    what just happened to my driver's side window

    Mine recently broke - both the white nylon shuttle and the black pulley on the bottom of the track. Followed the directions posted about repairing it and went to a local junkyard and purchased a window regulator out of a Voyager for $30. Swapped the nylon shuttle and the black pulley, rethreaded...
  9. J

    Whats with these damn check eng. lights? Need help.

    My 09 ACR (Belangers/Hi-flows) throws a code about every five hundred miles. Can't remember the code number but it is the one for O2 sensor response. I clear it and keep driving.... If this is your code, I have heard about some folks replacing the O2 sensor with a different model which seems to...
  10. J

    The Rauh couple.... where do they get their money? Haha

    Well over 50 now, I think somewhere close to 60. They keep buying cars... And yes, they are two of the nicest down-to-earth folks you could meet.
  11. J

    Replacing brakes on Gen 2 RT

    Re: One notion guys..I would use this tool below..I have been doing brakes for years. Nice tool, but don't use it on the stock rear calipers. The pistons turn to retract.
  12. J

    A/C O-rings

    Well, you know you should not have bubbles which indicate low refrigerant pressure. Those built-in gauges on the cans of refrigerant will get you close - close enough to cool. If what you see is milky-white, you might have moisture in the system.
  13. J

    vca meet in dallas

    Gonna be a great time. There is still time to sign up. Message me and I can send you a registration form. There will be a great cruise through East Texas, Autocross, Drags, dinners, Kart racing, and a boat cruise on the lake plus auction of some great items, and some give-aways.
  14. J

    2013 Cruise control, adjustable suspension.... what else?

    If the photos are to be believed: http://www.autoweek.com/article/20110718/CARNEWS/110719894
  15. J

    Anyone here "BAD GTS" plate, yellow turbo car in Murphy/Richardson?

    That plates match the yellow paxton SC'd GTS owned by Elliot Presser, but not sure if he is on the forum much. That car puts out some serious HP.
  16. J

    Spiderman Spiderman.............Spideman Viper

    Correction on last name: Rauh
  17. J

    Shop Reccomendations

    Did you try Musclehead?
  18. J

    Garage Addition Advice needed (plans attached)

    Measure the distance from your car to the point where the door is fully open to its farthest point. Don't put your lift any closer to the side wall. I don't know how many times I have worked on my car when it was on the lift and wished I could get the door completely open whether it was to get...
  19. J

    Gen 4 FULL Belanger set up. Opinions?

    I put the Belanger headers and hi-flow cats on my 09. It has thrown a code about 3 times over the course of the last 3000 miles, but I use my code reader to clear it and it is good to go. Not had a problem with state inspection if the code has been cleared for enough miles/restarts.
  20. J

    Balenger Head Gasket Issue

    I used the Belanger supplied gaskets and got exhaust leaks after about 300 miles. Replaced them with the Dodge metal gaskets - no problem since. I did re-tighten the bolts after a couple of heat cyles.
  21. J

    Would someone check a car for me in Texas

    email sent
  22. J

    Alan's Performance Radiators - is he still around?

    I remember when you predicted my Ron Davis would fail... well it did recently (pin-hole leaks in the fins) It lasted about 5 years so I don't feel too bad. Swapped the stock one back in and all is good. Let me know what you come up with for an alternative - I might be interested also.
  23. J

    fuel filter

    Make sure you relieve fuel line pressure before tackling the disconnect. I believe the manual suggests removing the fuel pump fuse and starting the car to drain the fuel line. Others use the schraeder valve on the intake.
  24. J

    Alan's Performance Radiators - is he still around?

    Dave, how many radiators do you buy? ... ;) BTW, enjoyed seeing you at the Summer Picnic. Sounds like you are getting that car perfected!
  25. J

    Removal of AC expansion valve. Done it?

    Not sure on the expansion valve, but I have always heard you should change the drier if the system is opened and I have always done this on my other cars.

Latest posts

Members online

Total: 2,047 (members: 7, guests: 2,040)

Forum statistics

Threads
153,663
Posts
1,685,354
Members
18,254
Latest member
Puntacanaviper

Share this page

Top