Search results

  1. D

    Vendor Review: Dan Cragin at SPT - Great vendor for extensive Viper mods!

    Thanks everyone. SPT is here to help and can take over when when other shops have given up. We enjoy technical projects and complicated builds. We also can help you with any type of service you might be need. Feel free to consult with us anytime. 310-597-6295
  2. D

    Driveability issues with 70mm throttle bodies?

    The 70 mm throttle bodies work well with a bigger cam and a proper tune. On a stock motor they hurt low speed throttle response and only pick up 5rwhp.
  3. D

    Running hot during autocross

    Here is a link: http://www.specialtyperformanceteam.com/shop/pc/Pusher-Fan-Upgrade-In-House-1996-2002-63p60.htm
  4. D

    Thinking 373!!!!

    I can supply you with a 3.73 or 3.91 gear with everything needed to install it. 6th gear will feel much shorter on the hwy. We are working on a higher 6th gear-lower rear end ratio package.
  5. D

    Installing YellowBox Speedo Box

    Unitrax, Devin and Jerry. These guys are a class act and understand any and everything about Viper gearing and LSD's. I have used them since 1994.
  6. D

    Need help finding a billet fuel pickup GEN 4

    This (Triple hanger) type of fuel delivery pump does not use a surge tank and can cause fuel starvation issues with less than 1/2 tank of gas. You can build a complete return fuel system with a in-tank primer pump and surge tank, external pump(s), regulator and and new fuel lines to support that...
  7. D

    2008 - 2010 Viper SRT10 Race Engine Controller

    Mark is correct, there is only 1 part number. When you program in the Vin number the controller knows if you have a vert or coupe. Then it knows how to set the electric window memory functions for soft and hard tops.
  8. D

    Waterpumpfault with Metalimpeller?

    Archer racing made a replacement metal impeller for a while. I have never had a replacement plastic impeller pump fail.
  9. D

    some pics of my rare 97 RT10

    Yep these are super rare, most were made for Chrysler Exec's. They did not have Gen 2 hoods so they used the smooth Gen 1's. Very nice!
  10. D

    WTB: 2nd Generation RT/10 or GTS

    Mike, Sorry for the loss of your wife. I would be happy to help you sell the car. 96-97 BW cars are very popular now.
  11. D

    Running hot during autocross

    Yes the kit comes with everything you need plus instructions. $699 Thanks!
  12. D

    Airbag Recall

    Whats the recall number?
  13. D

    Running hot during autocross

    If you have a Gen 2, we make a baffle kit for the oil pan and dual pusher fans to help low speed cooling. Marks suggestion is good, we have a misting setup we use in the front of the radiator when we do a lot of dyno load testing, makes a big change in temps.
  14. D

    Another 10 sec Gen 4

    I agree, the Viper is not designed as a drag racer. We built many Vipers for the drags and the one mile, there was always a point at which you change the whole nature of the car. There are some minor mods you can make to each Gen to make it better and more reliable at the drags while still...
  15. D

    Need help with a issue guys !!

    The reason this problem can be hard to define is that there are many things that can cause this issue. Mark and Doug made some good comments. Tell us some more about your car, engine or driveline mods, how many miles? Those 20 inch rear wheels use a Mich tire with a very stiff sidewall, tire...
  16. D

    From Factory to Mosport Track Attack in 7 days...Bruce's new TA finally arrives

    Bruce, Thanks for a very comprehensive evaluation. Enjoy.
  17. D

    Highest mileage gen iv acrs?

    I had an 08 in the other day with 69k. Ran really strong and no issues.
  18. D

    Couple of Maintenance questions on 97 GTS

    It sounds like a tire out of balance condition. In stop and go driving, its not abnormal to see a big change in coolant temps, 220 is normal.
  19. D

    Another 10 sec Gen 4

    There was a mention to how things can break trying to get a good ET, we struggled with driveline issues on Drag Vipers until we changed to automatic transmissions. Then they were very reliable.
  20. D

    Another 10 sec Gen 4

    Here is a link to our first NHRA certified 8 second run, several years ago. We had to change this car to an automatic, or else it would just break parts. http://www.youtube.com/watch?v=yRr-bifIkHk
  21. D

    Sourcing Obsolete Parts For Gen I and Gen II Vipers

    They are having a blowout on the hoods. I think around 5k new.
  22. D

    WTB: 2nd Generation RT/10 or GTS

    Call me anytime.
  23. D

    WTB: 2nd Generation RT/10 or GTS

    I would be happy to help you find 1996-1999 Viper. I have several clients with very nice, fully serviced, documented cars like that. Most are selling as they want a newer model. 310-597-6295.
  24. D

    Gen 3 Engine Blocks-New while they last

    As many of you know, the 2003-2006 engine blocks are no longer available from Mopar. SPT has 15 BRAND NEW engine blocks available, get them while they last. 5 2003-2004 Rear crank trigger 5 2005-2006 Side crank trigger 5 2006 Viper truck Automatic Price is $1600.00 plus shipping. 310-597-6295
  25. D

    anyone running paxton blower on gen1?

    We have done numerous. Stock 360rwhp, Paxton 550rwhp.

Latest posts

Members online

Total: 843 (members: 5, guests: 838)

Forum statistics

Threads
153,832
Posts
1,686,603
Members
18,436
Latest member
Primo2013

Share this page

Top