Search results

  1. P

    Gen3 RSI Twin Turbo Install Questions Thread

    looks good. Let me know if you need photos of anything else
  2. P

    Gen 3 Headlamp Experience

    My driver side lens is doing the same thing
  3. P

    Remote clutch slave bleed

    I used the 36” kit from Speedway motors on my Gen 3. I think on a gen 1/2 you can use a shorter line. https://www.speedwaymotors.com/T56-Release-Bearing-Remote-Bleeder,41385.html
  4. P

    Blinker indicators on dash not working

    Could be a loose connection on the bulb or just a burnt out bulb in the cluster. They are just old school incandescent bulbs, but you have to remove the cluster to get to them. That involves removing pretty much all the plastic surrounds on the dash.
  5. P

    Gen3 RSI Twin Turbo Install Questions Thread

    The power steering cooler goes onto the support bar below. Pic attached. You have to disconnect the lines and flip it around and then reconnect them. They are just on quick connect clips. I just took apart my RSI twin turbo Gen 3 convertible and moved everything to a Gen 3 coupe, so I know how...
  6. P

    Gen2 ROE chrome Supercharger $4500 obo

    Hello did you end up selling the supercharger kit?
  7. P

    ROE - Crank Pin kit - detailed pics of what it really does.

    They're roll pins. I don't think solid pins would be as secure. Roll pins are larger in diameter, as Ramtuff pointed out and expand when hammered in
  8. P

    ROE - Crank Pin kit - detailed pics of what it really does.

    I believe I found my answer on another forum... for those interested Drill bit .249 Pin length 1.497 Pin diameter .257-.258 It looks like other manufacturers have started selling their own kit https://jmbperformance.com/product/gen123-viper-ram-srt-10-crank-pin-kit/
  9. P

    ROE - Crank Pin kit - detailed pics of what it really does.

    sorry to bump this old thread. Since ROE doesn't exist anymore, I'm trying to find some info. I purchased the pin kit from them back in 2015 and used it on an old car of mine. I still have the guide, but don't know which bolts to use with it and what size drill bit and pins to use. Anyone have...
  10. P

    Paxton Supercharged 2006 Coupe Build Thread

    I put my baffles back in
  11. P

    Gen 3 vs 4 blocks and cranks

    Any other way around this? Ideally we’d use the original crank trigger location, but I’m not sure that can be done and if the 2004 crank has the pickup points on it?
  12. P

    Gen 3 vs 4 blocks and cranks

    Thanks for the response. The engine is currently just a bare block, I could have the machine shop add something for the knock sensors. His car being a 2006 he wants to keep the knock sensors, if possible. As far as the crank sensor, would you just extend the harness and run a 2004 style flywheel...
  13. P

    Gen 3 vs 4 blocks and cranks

    Sorry to bump this up. Trying to figure out if this will work. I have a 2004 block and my friend has a 2006 that needs a new bottom end. Obviously his crank sensor is crank pickup and he has knock sensors. The 2004 block I have doesn’t have knock sensor mounts and has the flywheel pickup. So my...
  14. P

    Black accent around exhaust pipe outlet

    it's just flat black heat paint. nothing special
  15. P

    Gen 4 hood on a 2006 Coupe

    My car is twin turbo so I don't have a factory airbox anymore. Not sure about that part
  16. P

    Gen 4 hood on a 2006 Coupe

    OEM Gen 4 hood will bolt right up. If you're getting an aftermarket fiberglass one or carbon fiber, you will need weaker hood struts, as the OEM ones are too strong. I just got a Carbon composites Gen 4 hood, as I could not find an OEM one. Not very impressed with the fit, but it's usable
  17. P

    Updating my twin turbo Gen 3, have some questions

    Well I ended up switching my car over to Link. The local tuner could not get the AEM running either, and I didn't feel like spending $2-3k on diagnosis and ending up in the same place I was. We went with the Link Storm X ECU. We were able to reuse all the same sensors, simply had to change over...
  18. P

    08 GEN 4 No spark

    I'm not sure what those relays are on the Gen 4, they aren't there on a Gen 3. The only relay that could cause a no-spark issue is the ASD relay. Find it, it might be in the main fuse box. Try swapping it with another relay and see if that works.
  19. P

    08 GEN 4 No spark

    That PCM looks like a used unit that came out of a junk yard or eBay. the "08 Viper" writing on it gives it away. Your issue might be that the VIN number on the PCM doesn't match the car. Like you said, you need a good scan tool
  20. P

    08 GEN 4 No spark

    Not sure if the security system is your issue. My friend had a similar thing happen on his Gen 4. He thought he unlocked it, went to start it and the car fired up and then immediately died. On the next key cycles, it would not even crank. I told him to close all the doors/trunk/hood, lock the...
  21. P

    Does anyone have a tune file for an AEM Series 2 for a Gen 3?

    I put mine under the steering wheel. Some people put them in the engine bay. It looks like this
  22. P

    Does anyone have a tune file for an AEM Series 2 for a Gen 3?

    You just need a regular USB cord, the type typically used for printers. If you don't have one, I would buy one for you off Amazon haha. Picture of USB cord attached Do you know where your AEM box is? One end of the box will have your wiring harness plugged in. The other end has the USB port...
  23. P

    DIY Catch Can Install

    Nice job, looks good. Where in Canada are you? Is that can vented to atmosphere or you're recirculating the gasses back into the intake?
  24. P

    Does anyone have a tune file for an AEM Series 2 for a Gen 3?

    anyone? I think I just need to have the correct ignition settings. Can't find them online anywhere. Crank/cam rising or falling edge? How many teeth? Ignition sync? I've been working on this for days now, still can't find the correct settings
  25. P

    Gen 3 upper door panel trim

    There's a thread on *** in the classifieds: "New Reproduction Gen 3 , Gen 4 inner Door Trim ,Improved and More Robust then Factory. Factory Trim has been Discontinued 10 YEARS Ago and Notorious for cracking . This Trim has Factory Fit and appearance to prevent rattles and squeaks ...

Latest posts

Members online

Total: 935 (members: 10, guests: 925)

Forum statistics

Threads
153,643
Posts
1,685,202
Members
18,219
Latest member
concours_classic

Share this page

Top