ANy issues or recalls I need to check for on the 04 SRT 10

[Dr Roof]

I just purchased an 04 srt 10 any recalls or things i need to check for?


the car has 300 miles and has been setting for 3 months

thanks

 

[Steve-Indy]

Check on the cam bolt issue, David...and, CONGRATS on your new ride !!

 

[Steve-Indy]

From JonB in the thread at the top of the SRT-10 page:

" Re: Current SRT Cam Bolt Issue - Straight from SRT
      #389273 - 03/30/04 08:17 PM  



CAAP Old pre-set spec was 200 in-lbs, plus/minus 10%.

When production went TRIPLE due to Ram SRT, the pre-set torque crept down.

Loctite was NEVER USED 92-2004.... It was just given as an excuse, as in "we shoulda used Loctite"

The decision was made to have the SERVICE ACTION go to 250 in-lbs. CAAP could decide to use loctite, but at 250 it is superfluous. Controversial In fact, if used at that rate it could interfere with obtaining a correct torque reading.

--------------------
JonB-PartsRack "

 

[1TONY1]

It shows up now as a recall, not a service action.

 

[SRT10]

To find out if any recalls or issues exist try going here and type in the last 8 characters of your vin...

http://www.dodge.com/webselfservice/dodge/index.jsp?screenName=recall&country=us&emailUrl=goToEmailForm%28%27R%27%29