Anyone try 12# pulley with Roe SC

[vegasviper]

If so, can someone email me the vec2 program for 12psi with water/****.
I have all the upgrades minus heads or cam.

Thanks

 

[FLX109]

I am using the 12# with water/**** and running the same settings as the 10#, will be heading to have in dyno tuned soon though.

FLX109

 

[vegasviper]

What upgrades do you have? Any head work, cam

 

[carl B]

Just got my 12 lbs pulley

Have to fit it soon!!

Carl

 

[vegasviper]

Do you guys have more upgrades than me? I have all but Heads and Cam


Will you be using the 9D water/**** card

 

[FLX109]

I am using the 9D card with no head or cam upgrades

 

[Viper23]

Hmm...how much of a difference will it be from the 10lb card? I have head work and cam with the 10lb and **** now. I also have some juice in the trunk...lol...

 

[1TONY1]

The part throttle driving with the 12lb will probably equal a bit more heat...intake air temp (a friend ran the 12psi) I know there is a noticable increase in the IAT from the 7psi to the 10psi.

Why is there more heat when not under boost ?? The blower is still compressing the air...it's just being bypassed in the manifold therefore not making any boost.

 

[Schulmann]

FLX109: What is your boost with this pulley ?
How much is it sensitive to air temperature ?

 

[vegasviper]

What about RPM, can i shift at 6500RPM?


Is A/F ratio ok with 9Dcard and 12#

 

[vegasviper]

Also, this is the card i have

SC-**-9D Rev 10=S106

Is this the same card

If not, can someone email it to me

 

[unreelviper]

Vegasviper, give Sean Roe a call, he can tell you exactly what you will need.....Good Luck.

 

[Simms]

Did you guys up your fuel pump or anything when running the 12# pulley?