team tech install

JonB

Legacy\Supporting Vendor
Supporting Vendor
Joined
Dec 8, 1997
Posts
10,326
Reaction score
45
Location
Columbia River Gorge
YELLOW FEVER indeed!

TeamTech is shipping most custom orders within 24 hours!

Janni and Henry have proven a great asset in the quest for SaferSnakes .....Thanks
 

VIPORXXX

Enthusiast
Joined
Apr 26, 2001
Posts
244
Reaction score
0
Location
langhorne, PA USA
Hi Mayasa,
I think I hate you!!!!!!!!!!
I just finished installing my Team Tech Harnesses about 9:15Pm
tonight. It took me about 8-9 hours over 2 days. I followed Jannis insructions to the letter. The results however were worth it. I ran into problems adjusting the harness and reinstalling the drivers side front seat.
 

Andrew2KRT10

Enthusiast
Joined
Apr 25, 2001
Posts
2,886
Reaction score
0
Location
New York, where else?
Put mine in yesterday. Cake! I had to Dremel out, not drill out the dimples in back. I suggest to use a dremel becasue you can be real careful not to go into the threads. If you are presing down with a drill there is a good chance that you might go into the threads. Also I found it best to lift up the rug to find the front crotch threads. Whole job took me about 3 hours; from taking the seat out, complete install, reassembly of everything and clean-up. As far as cutting the slits in the back. Just go slow and crefull with a steady hand. Cut less, you can more as you go if needed. Besides, when the seat is back, you can't see anything anyway. Oh, and I managed to polish off two bottles of wine in the process.

Andrew
 

TacDoc

Enthusiast
Joined
Oct 15, 2000
Posts
526
Reaction score
0
Location
Catlettsburg, KY
What do you attach the crotch strapS to? I have not put mine in yet because there is no predrilled mounting point in the floor.


Greg

96 RT (K&N carbon fiber airbox, smooth tubes, Borla 3" exhaust, revalved Konis, Eibach springs, adj endlinks, anti-toe brackets)

00 GTS (stock but not for long)
 

jimandela

Enthusiast
Joined
Jun 19, 2001
Posts
2,980
Reaction score
0
Location
Western New York, USA
TacDoc,
under the rug right in front of the seats; you will have to feel on the floor to find the nut, they cut the rug carefully...

mayasa,
do your straps have pads? mine don't so i ordered 2 sets of pads because if not you find a red neck in no time at all...

Jonb,
when the new 2003 model comes out; it looks like the seat will have slots for the belts so not to "pinch" the neck as much.
will the factory seats be available thru you??????

thanks
Jim
patriotx.gif
 
OP
OP
J

JonB

Legacy\Supporting Vendor
Supporting Vendor
Joined
Dec 8, 1997
Posts
10,326
Reaction score
45
Location
Columbia River Gorge
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Andrew2KRT10:
Put mine in yesterday. ....Whole job took me about 3 hours; .....Oh, and I managed to polish off two bottles of wine in the process. Andrew <HR></BLOCKQUOTE>

THAT EXPLAINS the upside-down lap belts !!!

,
,
,
,
,
,
,
,
,
, just kidding............
 
Top