GTS Dean's latest activity
-
I am shipping Dean a dip stick for Christmas -
GTS Dean replied to the thread 96 dipstick indicator.It's a freaking dipstick. Get one longer out of any vehicle, cut the top off the right length and drill a little hole in the right spot...
-
GTS Dean replied to the thread 96 dipstick indicator.AC and AD are later versions, so most likely what you want.
-
GTS Dean replied to the thread 96 dipstick indicator.If your dipstick tube inserts into the block just above the oil pan, then ANY matched pair of later model Gen2 tubes and sticks will fit...
-
-
I have USAA on all 3 of my Vipers, $930.00 total annually
-
GTS Dean reacted to Viper Specialty's post in the thread My Dealership No Longer Servicing Gen 5 with
Like.
Edit: jesussssss. This thread is a decade friggen old What exactly do you need? While I am in no way looking to dive back into general... -
GTS Dean reacted to daveg's post in the thread Gen 3 Irregular Wear on Valve Stem and Rocker with Like.
Ya, I agree, something looks out of square to me. Rocker / pedestal as mentioned. I would replace both. The Valve looks like it may need...
-
GTS Dean replied to the thread Source for front end suspension/steering parts.More often than not, your inner tie rods & rear toe links are the first to wear out. Same part number fixes both. eBay Bestpartsonline...
-
GTS Dean reacted to Peter Kater's post in the thread Gen 1s and Gen 2s-Adding Tire Pressure Monitoring with Like.
I personally went for an ebay tpms. The brand is HUF. It's used on all Porsches. There's Software to get pressure / temp directly on...
-
GTS Dean replied to the thread Aftermarket Proportioning Valve Install Question.I can ear-tune this one on diesel, or natural gas:
-
-
GTS Dean reacted to serafins's post in the thread Aftermarket Proportioning Valve Install Question with Like.
Ha! New balances are the mark of a good mechanic. Those guys can tune a carb by ear
-
GTS Dean replied to the thread Aftermarket Proportioning Valve Install Question.Definitely so. If you don't piddle around while pulling the spring and recapping, you shouldn't have to bleed the MC. The rear circuit...
-
GTS Dean replied to the thread Aftermarket Proportioning Valve Install Question.I stumbled upon these saved photos that someone else took many years ago when removing the spring. Some folks remove the o-ring and...
-
-
GTS Dean replied to the thread Frame holes or frame damage?.Gen 1 and 2 have different forming of lower members.
-
GTS Dean replied to the thread Emergency Brake Assembly not engaging.That does look pretty crusty in there. In my experience, 90% of the trouble is at the caliper actuator levers and springs. Pull the rear...
