OBD2 scanner

mhpearlman

Enthusiast
Joined
May 18, 2023
Posts
12
Reaction score
2
Location
91436
2014 GTS with 6k miles (what I feel to be in perfect condition) and the check engine light just came on. Any suggestions for a scanner made for a viper? or all scanners built the same? thanks
 

Steve-Indy

VCA Venom Member
Venom Member
Joined
Oct 2, 2000
Posts
8,627
Reaction score
228
Location
Zionsville,IN. USA
I would suggest that you get an inexpensive scan tool from Harbor Freight, Northern Tool, etc. Just be sure that is OBD II, CAN bus, reads and clears codes. They are $40.00 to $60.00.

I carry one in all cars...note just to clear the codes, but by doing so, one can get the car out of limp mode (at least on a temporary basis).

Remember: clearing codes is not a cure for the issue. Always record any codes that you plan to clear.
 

Dave1968

Enthusiast
Joined
Oct 20, 2014
Posts
80
Reaction score
0
I say spend a few bucks, get a good one as it will show you a lot more. Autel makes great units. You will have it for life and can use it on any vehicle with the OBD2 port. Have Fun!
 

daveg

Enthusiast
Joined
Dec 26, 2006
Posts
390
Reaction score
48
Location
Mass...
I have a Xtool D9 and its Bidirectional. I love the Bidirectional feature. Does pretty much everything under the Sun including OBD I.
Comes with 3 years of free updates as well.
 
Top