MoparMap's latest activity

  • MoparMap
    MoparMap replied to the thread GEN 3 2006 AC Heat Controls.
    I would think earlier versions should be okay. Typically speaking the two letters at the end of a part number denote revisions, not...
  • MoparMap
    MoparMap replied to the thread Tracking viper.
    I don't have any experience with a gen 5 on the track, but I think they are pretty well sorted from the factory as far as I'm aware. As...
  • MoparMap
    MoparMap replied to the thread Stock rear diffuser colors?.
    I've never seen a hood graphic like that before on a stock car, but I'm constantly learning new stuff about these cars, so it's entirely...
  • MoparMap
    MoparMap replied to the thread Stock rear diffuser colors?.
    That looks like a VCA edition car, though it's missing some of the extra graphics that go with it. There should have been a logo on the...
    • 1733144724299.png
  • MoparMap
    I've had moderate luck with finding stuff on RockAuto, but my car is a gen 3 and I know parts are starting to dry up for it even, so...
  • MoparMap
    MoparMap replied to the thread Stock rear diffuser colors?.
    Have you got pictures? I'm mostly just curious what all you mean, though I have an idea in my head. Kind of almost sounds like a VOI...
  • MoparMap
    MoparMap replied to the thread Rear Tire option?.
    Pretty much every tire made in Viper sizes is considered "summer performance", though some put up with less than ideal weather better...
  • MoparMap
    MoparMap replied to the thread Volt gauge reading.
    The regulator in the PCM isn't necessarily that bad of an idea. You get a lot better overall control of the system that way as it can...
  • MoparMap
    I noticed some pretty good cracking in the plastic behind the metal cover on my door the last time I had the panel off doing some work...
  • MoparMap
    MoparMap replied to the thread Volt gauge reading.
    Anything over 13 is ultimately still "good" in the sense that it's providing more voltage than the battery is using. As others have...
  • MoparMap
    Have you done any work on the heads? It almost looks like there are helicoils in the mounting holes on the head. Did the factory do...
  • MoparMap
    MoparMap replied to the thread New Gen III Owner.
    You can also just replace the crossover pipe with the gen 4 tips as I understand it. I have read that both gens used the same part...
  • MoparMap
    My mom's 94 has the similar tiny blisters. I think it's just the fiberglass off-gassing over many many years, so as others have said...
  • MoparMap
    MoparMap replied to the thread Viper Gen 3 Motor mounts.
    I have the Woodhouse poly mounts in my car and have been pretty happy with them. You will notice a little more buzz and vibration...
  • MoparMap
    MoparMap replied to the thread New Gen III Owner.
    Seeing as there is an O2 sensor right next to one of those holes, I'm thinking it would probably make sense to repair. I would think...

Latest posts

Members online

Forum statistics

Threads
153,688
Posts
1,685,500
Members
18,288
Latest member
JT Miller
Top