phipplet
Enthusiast
Hello,
Before I start tearing things apart and throwing parts at it. Looking for some Viper mechanic thoughts?
I have a 1994 Gen 1 with 56k miles. Went out driving yesterday, pulled up to a stop light. All of sudden the clutch pedal has no resistance / pressure and will not engage the clutch to put into gear. The pedal will go completely to the floor. When I let off the pedal, it returns to its normal position, but no pressure / resistance. The engine begins to struggle to idle, and I can hear what sounds like the slave cylinder slightly rubbing, spinning and the engine struggling to maintain idle. Towed it home.
Everything is attached under the dash. Bushings and bearings are fine on the pedal itself. The hydraulic clutch reservoir is full and there is no leaking anywhere.
Any ideas?
Before I start tearing things apart and throwing parts at it. Looking for some Viper mechanic thoughts?
I have a 1994 Gen 1 with 56k miles. Went out driving yesterday, pulled up to a stop light. All of sudden the clutch pedal has no resistance / pressure and will not engage the clutch to put into gear. The pedal will go completely to the floor. When I let off the pedal, it returns to its normal position, but no pressure / resistance. The engine begins to struggle to idle, and I can hear what sounds like the slave cylinder slightly rubbing, spinning and the engine struggling to maintain idle. Towed it home.
Everything is attached under the dash. Bushings and bearings are fine on the pedal itself. The hydraulic clutch reservoir is full and there is no leaking anywhere.
Any ideas?
