Search results

  1. S

    Diff coolers - What, how, who, etc

    If you think you need a trans cooler, then you really need a Diff cooler too. THe reason why I say it is because the diff heats up much quicker. THe temp switch switched on a 195 degrees and back off a 165 degrees. Foer me that equates to 2 1/2 laps at Road America, 5 laps and Gingerman, 4...
  2. S

    Cylinder heads spark plug holes tapered or not?

    According to Champion, Bosch and NGK, ALL Vipers use a 14mmx1.25 thread pitch GASKETED spark plug. No tapered seats.
  3. S

    first look at the new Pilot Sport Cup 2

    I did notice that one "POSSIBLE" drawback might be is that the UTQG is 180 over the 80 of the Sport Cup or the 40 of the Hooisiers
  4. S

    VCA back to the same old routine

    I knew that was coming.... We have been told that elections were going to be held prior to the NEW YEAR, in other words 2013. Now that it is 2014, and at the presidents meeting (what all 3-4 remaining chapters), how does that provide for transparency??? If there is half a chance that the VCA...
  5. S

    Diff coolers - What, how, who, etc

    I have both a diff cooler and a trans cooler on my '06. If you give me a day or so I 'll get some pics up. Its modeled after the Viper Race Car ones using off the shelf parts. I can tell you it works fabulously. It is temp controlled. Besides, you're like me, It's already cold, the weatherman...
  6. S

    first look at the new Pilot Sport Cup 2

    Hey Luke, Looks like an awesome Tire... I've alway preferred Michelins over anything else. I'll ask a dumb question though, If there are only 3 cars in the pipeline, What you guys doing with a tire like already. Do you anticipate those guys using them up soon?
  7. S

    first look at the new Pilot Sport Cup 2

    Hey Luke, Looks like an awesome Tire... I've alway preferred Michelins over anything else. I'll ask a dumb question though, If there are only 3 cars in the pipeline, What you guys doing with a tire like that already? Do you anticipate those guys using them up soon?:) Any idea rumor or...
  8. S

    HELP! Gen III fuel pump replacement

    I guess you never owned an early to mid nineties Chrysler Product have you? The Neons and other front drive vehicles were notorious for losing pumps...:smirk:
  9. S

    VCA Drama: what are the known facts?

    To piggyback off of George's comments above, When the bylaw changes were "introduced", There was a seperate forum category for it. The most asinine thing about it was you could post your question to the board and MAYBE GET A RESPONSE. It was closed from the standpoint of no one knew the...
  10. S

    New viper owner WI

    Welcome Man, There are several of us with 20-30 minutes of you. I live in Cottage Grove and have 2 Gen 3 cars. One my best friends lives in Fort and he has a Gen 2 Gen 3 and a Gen 4. There are a couple of owners in Sun Prairie, Verona, and Madison too. I would be remiss if I didnt mention a...
  11. S

    Steel Braided Brake Line Question

    Turn the wheels all the way to one side and stick your head in the gap. You'll be able to tell quickly...:D
  12. S

    Viper Gears

    Snakeoyl has a complete kit also.
  13. S

    how much top end>>

    There are some 3.33's out there but they were made for the Vette Dana 44. The bearing on the pinion gear is smaller than on the Viper. Some will include a spacer to allow it to fit, but I have seen even stock Vipers twist off the the end of the pinion gear where the drive shaft yoke is attached to.
  14. S

    Any 2014s?

    Another '14 was just delivered to Roanoke Motors.
  15. S

    Gen3 brakes on a Gen1

    You'll need a very good quality manual brake proportioning valve. The rears will lock up when you even barely touch the brake pedal.
  16. S

    Gen3 brakes on a Gen1

    The other thing I forgot to add here in this post , is the fact you cannot use stock rear rotors with brembo calipers as they are to small diameter wise and too thin.
  17. S

    transmission/rear end lube

    Those are two fluids that I wouldn't want to experiment with. Too much at stake. Dont forget the friction modifier for the diff too!
  18. S

    TEAM TECH 6 Point Harness for Sale

    I just placed an ad in the classisfied for a slightly used Team Tech Harness. Excellent condition. I bought a HANS and HANS compatable harness (also Team Tech) is the reason for the sale. Let me know if you have questions...
  19. S

    RB1 Navigation Radio

    Mine flashed Jeep momentarily and then Dodge from that time forward.
  20. S

    Suitable paint code/color for Caliper touchup?

    thanks for the info, I'll give it a shot...
  21. S

    Gen3 brakes on a Gen1

    It works with your car as you have 18" wheels. As I said previously, Gen 1 cars have 17's. Not enough room.
  22. S

    Gen3 brakes on a Gen1

    Absolutely no way as the Gen 3 rotors are too large in diameter...
  23. S

    Suitable paint code/color for Caliper touchup?

    Hey guys I am in the dog house. I had the wheels off of my '04 vert to do some cleaning. I try to be careful anytime I working on the car, but this time I nicked the caliper when putting on the heavyweight 10 spokes. My wife saw it, and to say the least she is not happy. And as every man knows...
  24. S

    Its worth saving, help john help you

    they have already said they are too busy trying to save the club than answer the questions put ot them. Maybe all of the non disclosure agreements they had to sign are preventing them.... :lmao:
  25. S

    Its worth saving, help john help you

    A BIG +1 here also. Inquiring minds would like to know.

Latest posts

Staff online

Members online

Total: 1,206 (members: 9, guests: 1,197)

Forum statistics

Threads
153,566
Posts
1,684,647
Members
18,130
Latest member
Andyk753

Share this page

Top