Search results

  1. W

    DRB III

    This might not be much help, but this is the only cable (picture below) that came with my scanner when I bought it a few years ago. I have seen other attachments, but this is the only cable that I have needed so far. The cable below is about 12 ft long and the part number for the cable is on the...
  2. W

    Tire Pressure Sensor recommendation

    I thought of using a soldering iron and go around the edges to melt the softer side of the plastic but was too afraid it would have done damage to the electronics. I did end up destroying the one sensor trying to open it up with a knife, so I figured I would just replace all 4 of the sensors...
  3. W

    Tire Pressure Sensor recommendation

    I first considered the Dorman sensors that you have mentioned until I realized that I would also have to purchase the tool to program them, and I wasn't sure if the Dorman sensors would actually work on the Viper too.
  4. W

    Tire Pressure Sensor recommendation

    Thank you sir! That was one of the two sensors that I was looking at on RockAuto. I just needed to be sure that they would work.
  5. W

    Tire Pressure Sensor recommendation

    Thanks, Old School I do have the necessary equipment like a Chrysler DRB3 scan tool and the reset tool that you have listed above to do the job I just need to know what sensors will work the best without any issues. Do you have any recommendations of what sensors that would work the best?
  6. W

    Tire Pressure Sensor recommendation

    Yes, I did try to open up the softer side of the plastic on the sensor to see if that would be possible, but I ended up destroying it.
  7. W

    Tire Pressure Sensor recommendation

    I have a 04 Viper, what tps will work best with my car? I do have a DBR3 and a magnet or another tool to activate the sensors. I was looking at RockAuto at 2 different sensors, the Schrader sensor part #29227 or VDO sensor part #SE10004A. Thanks in advance!
  8. W

    Tacky dash pad

    Not a Viper, but a 08 Jeep SRT8 that I have had the same problems with the dash being sticky. I tried several things that was on the internet that people recommended at the time to remove the sticky feel but had no luck. What I ended up doing was replacing the dash, I was lucky at the time that...
  9. W

    Video (wanna go fast) smoking a Roush Mustang

    Any pictures from the event?
  10. W

    C'mon Man....

    I've had 2 incidents when I have told people before to get the F*** off my!! And yes my exact words were get the F*** off my car. Theres NO one here being hardcore? Again like I said its the lack of respect of other peoples property!
  11. W

    C'mon Man....

    I would have told him to get his shriveled up old man pastey ass off my ride! I don't give a **** who you are, its the lack of respect to others property!
  12. W

    make my dream come true

    What ever blows up your skirt sister, you're still a whiny bitch!
  13. W

    make my dream come true

    Austin has excellent skills in photoshop, "the best" better than alot of others I've seen you whiny bitch!
  14. W

    Motons & Wheel Spacers Installed Pics

    The cars stance looks perfect with the wheels pushed out even with the fenders! Where did you get the wheel spacers from?
  15. W

    1941 Willy's "Coppercino"

    Nice looking Willy's!
  16. W

    The most gorgeous viper I've ever seen....

    The owner of the ebay Viper should be punched in the balls with some brass knuckles.
  17. W

    Need a good dynotuner near Greenville, SC (charlotte will work)

    If it was my car I would take it to some of the tuner's that plumcrazy has listed just for the peace of mind. I would prefer a tuner that has extensive knowledge on tuning Vipers than a tuner that has just only worked on mustangs and camaros just because of what Final GTS stated above. I mention...
  18. W

    Need a good dynotuner near Greenville, SC (charlotte will work)

    This guy has a big name for himself in the Atlanta, GA area. I know a few cars that he has worked on and heard several people speak highly of him as well. www.bradbrand.com
  19. W

    Need a good dynotuner near Greenville, SC (charlotte will work)

    Exactly, thats what I figured since its not one of their builds.
  20. W

    Need a good dynotuner near Greenville, SC (charlotte will work)

    No, but I've spoken with a guy that had a 03 or 04 Cobra mustang that had some work done by this company and he was very pleased! I understand what your saying as far as wanting to have someone that is qualified in tuning the Viper, but it wouldn't hurt to make a visit and check with this guy...
  21. W

    Need a good dynotuner near Greenville, SC (charlotte will work)

    You may want to talk to this guy, he is located in Pendleton, SC. www.amazonracing.com.
  22. W

    Jesse James VIPER kicks ASS!

    It's in Popular Hot Rodding magazine April 2001 issue. They are some on ebay if interested.
  23. W

    Found some old pics of my car

    Amazing / impressive how much more tq over hp it made! I bet it was hard to resist using the nitrous alot with that much torque.
  24. W

    Found some old pics of my car

    Plumcrazy how much nitrous were you using and was the motor stock or built?

Latest posts

Members online

Total: 931 (members: 7, guests: 924)

Forum statistics

Threads
153,609
Posts
1,684,958
Members
18,178
Latest member
wrm92

Share this page

Top