Search results

  1. G

    1993 Chassis Measurement Data

    Go to a body shop that is certified in lamborghini or a racing car shop. The lamborghini frames are tube frame talking about the Diablo and murcielago so current year.
  2. G

    Your Local new york Dodge Dealership

    Akporovwovwo Chrysler/Dodge of Nigeria. But they do not take the Prince's money he promised you in that email as collateral.
  3. G

    1993 Chassis Measurement Data

    The service manual.
  4. G

    Replacing Alpine deck

    Then is it your charging system. Check the alternator connections and the grounds to it and radio, amp, PCM and whatever other thing is on the same power and ground circuit of the amp and radio.
  5. G

    Hard Start and Fuel Pressure Regulator

    Your pump assembly is different as is the 96 gen2. Search the forums. Just cycle the key and forget about the stupid time relay someone here is going to suggest until you can fix it properly.
  6. G

    Oil Temps

    @SN8CHMR Post the part numbers and links.
  7. G

    Sway Bar Part Numbers???

    Gen5 have hollow and solid ones so watch out.
  8. G

    DRB III

    How much do you buy it for?
  9. G

    DRB III

    @WALKING TALL that's the newest revision of the cable.
  10. G

    Replacing Alpine deck

    Trade in the wife then. Does it change with rpm? In all the speakers (change balance)?
  11. G

    Advice needed - fix or sell as is?

    No check post #5.
  12. G

    DRB III

    I have a launch x431 but this drb came up but with nothing but the scanner and I saw on ebay various kits and cables. Those cable assembles ain't cheap too. If it is just a straight through cable with just different ends, I can make one for pennies. But if it has some intermediate chip then...
  13. G

    DRB III

    Guy has a one locally but just the scanner. No case nor cables. What cables does your scanner have?
  14. G

    Oil Temps

    Coolant depends on your climate for it to be 50/50 and it's climate in storage.
  15. G

    Roe fan switch issue

    You know the Roe has it's own sensor right? The PCM nor the engine coolant sensor in the block has nothing to do with the Roe module.
  16. G

    Advice needed - fix or sell as is?

    You too late. See post #5.
  17. G

    Roe fan switch issue

    How do you know what the sensor temp is? You are assuming it is below the setting on the module. I would disconnect the wire to the fans, put a voltage meter or test light on it, run the car let it come to temp and see when the test light turns on. Shut car down come after 1 hour and 2 hours...
  18. G

    Roe fan switch issue

    That Roe instructions is for Gen2 cars that have lo/hi 2 speed fans. Per your book, you only have 1 input to the fans and you probably tapped into the wrong LG wire. The fan wire will be 14 gauge. I would tap it at the fan connector to make your life easy or trace the fan connector back to...
  19. G

    Advice needed - fix or sell as is?

    PM me how much, pictures, mileage etc.
  20. G

    Roe fan switch issue

    Can you post the wiring diagram you have from your service manual since it is a Gen1. I only have 97 and 98s.
  21. G

    Roe fan switch issue

    I'm assuming the switch is supposed to activate the relay the PCM activates to activate the fans. And I would always first understand what and how something is supposed to work and how it is doing it before doing anything. Second, I would then trace the factory wire to where it going to...
  22. G

    Coilovers / suspension options Gen V

    Coilovers will be manually set. No electronic setting unless you find some highend ones but you are talking $$$. A and B plus look at dual or triple adjustable ones and C = penske Plus what do you consider higher speeds?
  23. G

    Gen1 Roe Exhaust Question

    Austria and you are not on jail for running catless? They need to heat up to 600-700C, so as Dean stated, close to primaries. https://www.viperalley.com/threads/cutting-out-catalytic-converter-how-to.102909/
  24. G

    Tacky dash pad

    Neutrogena wipes supposedly work too.
  25. G

    Replacing Alpine deck

    There is an amp too. Search the forum and the other forum. The radio is a little shorter then normal units if I remember correctly so you need a 90 degree connector for something.

Latest posts

Members online

Total: 1,144 (members: 3, guests: 1,141)

Forum statistics

Threads
153,609
Posts
1,684,960
Members
18,179
Latest member
Luigi93

Share this page

Top