Search results

  1. J

    New 05037836AA Oil Filter

    Thanks Bill, was hoping you would ring in... You failed to mention the most important part, the Viper logo on the filter is worth an additional 7.26hp... LOL Take care, have a great weekend..
  2. J

    Error Code P0151

    Just installed a new Intercooler and larger pump on my 2006. Have had zero issues with the car since new. Went to start the car and have a engine check light, code P0151, what's that? O2 sensor? Everything I did was in front of the radiator with the exception of installing the new pump under the...
  3. J

    For those who have installed a DLM Intercooler and pump.....

    I spoke with Doug today, he goes out of his way to help. The line from the pump goes to the lower (45*) nipple. As that hose approaches the intercooler pretty low on my car, I purchased a section of hose with a 90* angle, attached it to the intercooler so the free end of the hose ends up...
  4. J

    For those who have installed a DLM Intercooler and pump.....

    I installed the DLM intercooler pump first, then went to install the intercooler. 3 questions, 1) does the hose that normally goes to the driver's side of the stock Paxton intercooler go on the bottom 45* nipple of the DLM intercooler (but hose needs to be significantly shortened)? Is that...
  5. J

    New 05037836AA Oil Filter

    Actually mine are in a plastic bag and also have the plastic cap on them. The outside looks perfectly clean, with some traces of clean oil. They seem to be heavier than normal, like they were partially filled with oil. Thanks John
  6. J

    Painted Snake & 6 Point Seat Belt

    Sounds like they won't require much heating at the track, just a short burnout to heat/clean them off before heading to the line. Best of luck.....
  7. J

    Painted Snake & 6 Point Seat Belt

    Looks great! We'll say tuned for your times. Good luck...
  8. J

    New 05037836AA Oil Filter

    Just picked up a couple new style oil filters and was surprized by their weight. Are they pre-oiled some how or perhaps actually flow tested? They are packed in a plastic bag (with some oil residue) inside the box. Thanks
  9. J

    S/C heat soak

    In Gen3 Paxton systems, the intercooler is a seperate system.
  10. J

    Any One have experience with Crower 1.7 Rockers?

    Crower makes a number of different rocker arms. I can't speak to Viper applications, but their stainless steel 17-4PH (phase hardened) roller rockers are an excellent product. Good luck..
  11. J

    Dynojet in teh MD/VA area?

    Thank you...
  12. J

    S/C heat soak

    Install the large DLM intercooler larger pump. Go to page 3 of this thread to see pics.. http://forums.viperclub.org/showthread.php?t=600206&page=3
  13. J

    Best Buffer?

    I bought a 7424 today, brand new in the box for $100. Not a bad deal.
  14. J

    Drag Radial users Chime in

    Applying this 3M film should help.....
  15. J

    Dynojet in teh MD/VA area?

    Any reputable Dynojet shops in the MD/Northern VA area other than Infinite Speed and Performance in Beltsville? Thanks John
  16. J

    DLM Intercooler Upgrade is a must!

    Kenric, I've had success with WW in the Shelby/BOSS/Pantera cars. Was planning on running a mix of 70/30 water/antifreeze plus WW in my intercooler when I swap the DLM items this week.. I'm in MD, and (hopefully) my cars would never see a freeze in the garage.
  17. J

    DLM Intercooler Upgrade is a must!

    Could you walk us through the installation process for the cooler and pump?
  18. J

    What happened to GTS-R 001 and his Carbon Fiber splitters, wings, etc??

    Bump......
  19. J

    Have to call John from PartsRack

    Actually mine doesn't fit between the bracket and the center facia, it snaps over the back of that molded bracket. Try pushing it in and it should snap and lock over it.
  20. J

    What happened to GTS-R 001 and his Carbon Fiber splitters, wings, etc??

    Anyone heard from GTS-R 001 recently? He released a vert to coupe conversion, carbon fiber CC front splitter, side splitters and was about to complete a splitter for the stock Gen3 front end. I was hopefull to pick up a splitter but haven't seen him on here in weeks.. ?????????
  21. J

    Have to call John from PartsRack

    I received my tag mount today from Jon and it fit perfectly on my 06 Coupe. The driver's side of the bracket slides in between the hood release and the center portion of the facia. Disassemble the tag from the brackets, slide the brackets into place, mark where to attach the tag to the brackets...
  22. J

    Car won't go into gear

    I live 10 minutes from Waldorf Dodge. I thought I read here that at some point Byron was the VT at that dealership..
  23. J

    Car won't go into gear

    Re: Car won't go into gear: REASONS FOUND!!! I'm in Maryland, what "Viper Tech" looked at the car, and which dealership did the work in the first place? Sounds like they need to make it right........
  24. J

    I Wrecked My 800hp Sc Srt Viper...

    Good that you're alive and relatively unharmed. Have your seatbelt on or did it somehow fail? Take care
  25. J

    **The Great Group Buy Event** SRT SIDE SPLITTERS CARBON FIBER & FIBERGLASS

    Any word on the GEN3 front splitter for use without the front fender extensions? Thank you John

Latest posts

Members online

Total: 1,361 (members: 5, guests: 1,356)

Forum statistics

Threads
153,609
Posts
1,684,960
Members
18,179
Latest member
Luigi93

Share this page

Top