Search results

  1. B

    redlined bad now not running right

    This is hilarious, guys. TWISTER, do THIS, use a vacuum gauge on a direct vacuum source---like the power brake booster line. This will tell for sure if something is wrong internally. It's quick, but will not tell you where the problem is or what it is. Attach the gauge, start engine watch...
  2. B

    Best 93 Oct. Gas to Use?

    Hey Dom, come on down and take it for a ride.
  3. B

    Best 93 Oct. Gas to Use?

    Try purchasing race fuel just once, expensive but a unique experience. The smell alone is worth the 8 bucks a gallon. I don't know why, but my car ran much better on it. All stock internals with just a mild tune. John
  4. B

    Recommended Gears for 06 GTS

    3:55's, plenty of comments about this, do a search. I have them in my 06 and they're perfect.
  5. B

    After market throttle body

    Like others stated, I did not dyno before or after and did not notice any change, although if there would be a small increase, I would not recognize it anyway. I installed the Sean Roe single plate and had zero problems. Idled normally and acceleration was good as well. Worth the money? Just...
  6. B

    redlined bad now not running right

    A simple check using a vacuum gauge can rule out/in valve piston damage quickly and easily. Do that first if it's a bouncin at idle, you have an internal problem. EASY
  7. B

    Same trailer stolen again!

    It was suggested at the last recovery of my Featherlite 3110 that I install a Lojack, but noooooo. Now it's gone again. We have a good idea who took it this time. My question now, is there a better tracking device than Lojack or just go with that? I'm buying another trailer Saturday and want to...
  8. B

    Future Viper

    Speaking of emblems, you do know that the nose emblem is merely glued on with some type of double sided tape. Just peel it off and stick a new one on.
  9. B

    Getting ready for my 1st Viper...answers & Opinions PLEASE

    My vote is for the stock one. You can always mod it later. Not to start trouble with the modded folks here, but S/C engines are under much more stress and therefore subject to a possible failure of some type. You can always mod at your convenience, and as finances allow. Just my .02. Good...
  10. B

    Wheel hop = Blown rear end :( Be careful

    Check the hub at the outer portion of the half shaft. I twisted one in half during a drag race. Mine was on the left side. Jack up the car and take a look. Did not hurt anything else and was fairly easy to replace. Good luck, John
  11. B

    best windshield towel?

    Newspapers and windex have always worked for me.
  12. B

    Mopar Southern Classic on Sept 11!

    I'll be there, but damn, 8:30AM? Now I gotta wash the darn thing too in the AM prior, then Breakfast at Waffle house in front of Year One.
  13. B

    Headers... whos got the best sounding?

    Soooo typical of the kid.
  14. B

    Gen3 N/A Built Motor

    Details on the build? Very nice numbers.
  15. B

    5 spoke help - curb rash

    Where are you?
  16. B

    Learn to Park

    ok, this is/was not right but it was funny and I learned a lesson. I found a handicapped mirror tag in an abandoned car which was left at my shop (YEARS AGO). Wife and I went to dinner and I hung the thing on the mirror after parking in a handicapped spot. Jokingly, i pretended to limp into the...
  17. B

    06 engine failure

    David, what type of fabrication will need to be performed? Thanks, John
  18. B

    Uh, I did it again!!

    C-Note--I believe towing is a no no with these trucks. The frame is too light to handle the engine torque pulling a trailer, but getting wood (pun intended), should be fun. I looked at them back when they came out -only manuals back then, but went with an extended cab Hemi-Ram, loved that truck...
  19. B

    Fuel Pump Relay

    I agree with Phun70
  20. B

    This will make life easier for us downstate'rs...

    Perfect timing for us. Going to the big apple this fall to see my son who works at the 43rd precinct in the south Bronx. Is it safe there?
  21. B

    Results of that N/A bulid?

    Tony, any dyno runs yet?
  22. B

    Results of that N/A bulid?

    Anyone point me in the direction of the results of the build on a gen 3? This was done recently. I believe it was getting Greg Good heads and a cam. Thanks, John
  23. B

    Guess I Found my AC Problem

    Rebuilt AC compressors will never last long. For the slight difference in price, go with new. As mentioned by Eurochristo, it may be working properly. From your description of the problem, I would guess the problem is merely a low freon charge. AC compressors are meant to cycle to prevent...
  24. B

    Time for a new viper??

    Maybe it's not the car they're avoiding!:D
  25. B

    where can i find the best prices on an exhaust?

    Try Ebay, I bought my Bellangers complete used set including side pipes. Don't remember the price, but knowing my spending habits, I'm sure they were cheap. John

Latest posts

Members online

Total: 1,105 (members: 4, guests: 1,101)

Forum statistics

Threads
153,647
Posts
1,685,252
Members
18,227
Latest member
Kkustelski

Share this page

Top