Search results

  1. P

    Made 1304 RWHP on my side mount CPE TT set up

    Josh, I am going to reiterate one more time that all runs prior to the 1300 RWHP pull had the flexible ducting and air filters attached: I think the flexible ducting has no problem up to the 900 rwhp range and it shows as it made 900 RWHP at 10 PSI. It made 950 on 11.2ish PSI. I believe it...
  2. P

    Made 1304 RWHP on my side mount CPE TT set up

    Josh, like I said in an earlier post, all the runs except for the very last one had the flexible ducting and the air filters in place. It made 1005 RWHP/1003 RWTQ with the air filters on and flexible ducting in place. I have a new option available for the subsequent cars. I will upgrade...
  3. P

    Made 1304 RWHP on my side mount CPE TT set up

    He has a monster weldon pump and enough injector. Donovan's air fuel tables based on load and RPM were right on!
  4. P

    Made 1304 RWHP on my side mount CPE TT set up

    All dyno pulls except the very last 1300 RWHP pull were made with the flexible ducting and air filters in place.
  5. P

    Made 1304 RWHP on my side mount CPE TT set up

    Josh, I would like to clarify this for you: We did this pull 30-45 minutes after the previous pull. PBJ has a heated garage. We closed the doors after the prevoius pull and the heating system heated the inside of the building to 70 degrees. We opened the door right before the pull 2 feet...
  6. P

    Introducing myself

    Welcome! Congrats!
  7. P

    Anyone selling a autoform roll bar ?

    I have one. Ask Anthony!
  8. P

    Gleason's CPE Twin Turbo Creampuff Dyno Graphs

    This is a great reoprt and good news from Mr. " I think I could use 200 more RWHP about now...." Gleason! :headbang: :2tu: :rolaugh: :D
  9. P

    96 Viper GTS Venom 550 - making more mods

    Jason, how come the speedo only goes to 250 MPH???????????? Are you planning on running out of stones or road before running out of power and AERO? I will be renting a wind tiunnel with one of my customers on the about 4 months or so. Will you be ready to share the rental?
  10. P

    Best Twin Turbo Setup!!!!!

    Jason, thanks for the props! I wonder if your car just might be too fast when we are done with it! I willl be in the passenger seat when you hit the gas for the first time with a video camera!
  11. P

    Best Twin Turbo Setup!!!!!

    Shelby, I could not agree with you more about having the turbo system manufacturer/Tuner do the install. Most people will not have the patience or tools to do such an install in a proficient and timely manner! My system does not notch the frame whatsoever. The entire layout of all the...
  12. P

    Gleason's CPE Twin Turbo Creampuff Dyno Graphs

    Bottlefed, thank you! Every time I do one I figure out a few more things!;)
  13. P

    Gleason's CPE Twin Turbo Creampuff Dyno Graphs

    Keep in mind this car is completely stock motorwise. Valve covers have never been off the car!
  14. P

    CPE sidemount T-04 Twin Turbo

    I have been in the car with TOOOFSTwhen he shifts like that............... All I can say is you need to picture a cariacature this chubby little guy with both feet on the dash board and both hands on the shifter and his head back in the trunk pulling on that shifter with everything he has...
  15. P

    New puppies for my car :)

    Tony, I am very excited at the prospect of working with you to install my TT systems and to your laying down down some #'s at the dyno and track to see what this setup can really do! Congrats on taking the plunge for the TT's! :headbang: You will be :drive: in no time!
  16. P

    CPE sidemount T-04 Twin Turbo

    Jason, fuel pump, lines, fuel rails, regulator and engine management, 170 degree thermostat, -10 fittings coming out of the top of the valve covers to your crankcase breather, Maybe water-meth wired in and plumbed and ready to go for higher boost with pump gas that you can run with the proper...
  17. P

    any high perf/prototype Intake Manifolds for Gen.II?

    CANTDRIVE55, I have test fitted this on two different cars and all fits like it is supposed to. The height of this piece was designed to be the same as a Gen 2 Intake with fuel rails on top of it that everybody has been running for years. This intake is designed for higher RPM engines making...
  18. P

    any high perf/prototype Intake Manifolds for Gen.II?

    Richard, the bell shaped inlets would do a whole bunch to direct the flow of air in a naturally aspirated application. The inlets are hardly facing each other since they are staggered in layout and their faces are parallel to the Vee of the outer walls of the intake. The firing order is the...
  19. P

    any high perf/prototype Intake Manifolds for Gen.II?

    Here is the Mitech sheetmetal intake that will fit a Gen 2: It has cast shorter runners with the appropriate taper, super high plenum volume(700+ Cubic Inches> stock's of about 350 CI) for higher RPM N/A and forced induction applications. This is the perfect intake for a modded motor or...
  20. P

    ACR WHEELS

    I have a set of ACR wheels for sale for $3500.00 with tires. Anyone interested, please send me a PM!
  21. P

    Horsepower in Escanaba (lots of pics)

    Bruce, It was great to meet all the Michigan VCA members! Everybody made me feel right at home down to getting to be an honorary Michigan member with the Michigan VCA T-shirts for myself and my helper Cory! It was a very nice cruise to the zoo as well! I will do my best to make to to...
  22. P

    Castellano TT Kit Arrives

    Carl, looks like you have been working hard! Great Job so far! Looks like you will be :drive: in no time at all!
  23. P

    Castellano TT Kit Arrives

    Vic, I do not think any TT system for the Viper is CARB certified. I think people getting this have some 'special' way of dealing with the emissions people!
  24. P

    Castellano TT Kit Arrives

    Carl, I am glad to see you got it all through customs! I still cannot believe they let you take it all on the plane! It was great meeting you and Simon, I know you guys will do an exquisite install! I figure the install should take about 20-30 min........... LOL! I am sure we will be on the...
  25. P

    1496 rwhp dyno graph, vid, etc...

    Carl, I'll pick you up at the airport tomorrow!

Latest posts

Members online

Total: 1,397 (members: 8, guests: 1,389)

Forum statistics

Threads
153,663
Posts
1,685,351
Members
18,254
Latest member
Puntacanaviper

Share this page

Top