Search results

  1. M

    H pipe installation

    How is the ground clearance affected since the pipes pass under the frame? Do you have any pictures, maybe from the side of the car, with the car on the ground? Also, what was the cost to do something like this? Matt
  2. M

    Need help with insurance

    I had Mercury right up until I bought my Viper. After I got their quote to add the Viper to my policy I went shopping. I finally settled on Nationwide as they were less than half of what Mercury was quoting. Matt
  3. M

    Gappy Hood on 96 RT/10

    Tom, A couple of things: 1) you can upload pictures to the Viper Club media area through a link off the www.viperclub.org page. It's free and convenient for these "show and tell" type posts. 2) There are adjustable stops for the hood to set it's position. These may need to be adjusted more...
  4. M

    Twin Supercharger Package Revealed! (Pics)

    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Albert Chlouber: How do you balance the airflow output between the two so that the engine receives a balanced airflow. <HR></BLOCKQUOTE> In one of the other pictures it is more clear, but there appears to...
  5. M

    Twin Supercharger Package Revealed! (Pics)

    Dan, Nice looking install and great work. I do have a couple questions though. What is the reasoning behind using two superchargers instead of just one? I'm guessing the reliable level of boost that these will be run at could be handled by a single head unit? As TurboSnake mentioned, there...
  6. M

    Dyno #'s for my DLM Stage 1 Viper

    Re: Dyno #\'s for my DLM Stage 1 Viper <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Anthony - 98 GTS: What exactly is "water injection?" How does it work? Thanks. <HR></BLOCKQUOTE> Water injection is a form of detonation control. Sometimes a mix of...
  7. M

    Dyno #'s for my DLM Stage 1 Viper

    Re: Dyno #\'s for my DLM Stage 1 Viper <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Anthony - 98 GTS: What exactly is "water injection?" How does it work? Thanks. <HR></BLOCKQUOTE> Water injection is a form of detonation control. Sometimes a mix of...
  8. M

    REMOVE EXHAUST CATS

    You can remove the cats and replace them with straight pipes if you like. There should be no ill effects on the engine or the PCM. It will be loud though, but loud is good! Matt
  9. M

    Got a question.

    These questions have all been asked before. Try doing a search on key words such as cost, warranty, reliability, insurance, etc. -Matt
  10. M

    New replacement GTS Side Sills painted at factory or dealer?

    Luc, Where are you having your sills painted? I had mine replaced through Steven's Creek Dodge and they have obvious orange peel which I need to have corrected. Matt
  11. M

    maybe some serious/mature advice?

    I agree with Dirk Pitt. Let him have it. It's painfully obvious our advise will do nothing to change this kid's mind. If I was 16 and my father was dumb enough to buy me a Viper I would have snatched it up in a second. Of course, there's a strong likelyhood I wouldn't even be here now if that...
  12. M

    ((((((((((Subwoofer installation))))))))))))

    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Anthony - 98 GTS: Wayne, Where did you mount the center channel? Sound like a great set-up. <HR></BLOCKQUOTE> I believe they are mounted to the back of the rearview mirror. The setup is very clean. -Matt
  13. M

    ((((((((((Subwoofer installation))))))))))))

    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Makara: Oh I love the McIntosh amps. I have had them in two cars so far including my viper. My question is: how much bass gets through the gas tank into the passanger compartment if I have a single 10 in...
  14. M

    V-mania double bubble top

    Here you go: -Matt
  15. M

    N. California new home for Daytona!

    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Brian Denham: So Ben, will THIS car remain stock for very long?? ;) What have you got planned for it? Very nice ride man! <HR></BLOCKQUOTE> Ya, I hear there's going to be an unused BTR Nitrous system laying...
  16. M

    NorCal Peninsula Viper GTG 10/14

    WoooHooo, I'm there. -Matt
  17. M

    Heads & Cam kit

    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Gerald: Matt, well all know that GenII's went to rear exhaust which helped them pick up I think, 15HP? I also think that the GenII's have a more radical cam then a GenI. Maybe that's where the extra 50HP came...
  18. M

    N. California new home for Daytona!

    What's this, a GTG to gawk at Ben's new addition. I'm always up for another excuse to drive the Viper around. Just name the place and time. BTW, congrats on the coupe. How does your wife feel about driving around what looks to be a full race car? I kinda figured you go the coupe route, but...
  19. M

    Heads & Cam kit

    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by 1bad gts: Matt, for some reason Gen 1 engines are usually approx 25-30 hp at the tires behind Gen-2.(given the same mods.) <HR></BLOCKQUOTE> <BLOCKQUOTE><font size="1" face="Verdana...
  20. M

    Heads & Cam kit

    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by 1bad gts: Matt, for some reason Gen 1 engines are usually approx 25-30 hp at the tires behind Gen-2.(given the same mods.) <HR></BLOCKQUOTE> Can someone explain why this is still the case once the heads and...
  21. M

    Heads & Cam kit

    I'd like to know if the RWHP results quoted above for the heads/cam/exhaust package are the same for a Gen1 motor? Matt
  22. M

    My homemade ramps works best (pictures)

    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by motomike: Your pictures don't display. <HR></BLOCKQUOTE> Try a screen refresh. They are OK, but they didn't load the first time for me either. Matt
  23. M

    2003 Viper

    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Bill Lundeen: Actually what Jim Julow said in "Perspectives" (page 7) was, "I honestly think I can sell every 2003 Viper just by offering them to VCA members first! But whether I can do that, or whether I...
  24. M

    2003 Viper

    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by ou812haha: I have already been to my dealer and will be getting number 3 of 6 that they will receive. <HR></BLOCKQUOTE> How do they know they are getting 6? The release structure for the 2003's has not even...
  25. M

    Front splitters and rear wings?

    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Nadine UK GTS: Matt, who make the roof scoop shown in your pic of the RT please? (I feel another Viper purchase coming on!!) <HR></BLOCKQUOTE> No need to buy a whole other car, although two IS better than...

Latest posts

Staff online

Members online

Total: 1,935 (members: 8, guests: 1,927)

Forum statistics

Threads
153,663
Posts
1,685,354
Members
18,254
Latest member
Puntacanaviper

Share this page

Top