Search results

  1. GTS Dean

    HELP HELP HELP!!!

    Glad it's working out for you now. Mechanical stuff is pretty straightforward. 4-rib manifolds are not exactly plentiful, but 3-rib Gen 1 units are.
  2. GTS Dean

    Production run 4778637AB from china

    Mine is a very early '96 that would stall and die on decel to a stop. It required a new flash that held the idle around 850 for about 1.5 sec before dropping down to ~700. I still have to let it run the step span routine on rare occasions after a long time unplugged - just like you said.
  3. GTS Dean

    The Quest for 275 MPH

    The relief valve sounds like a good idea. What oil viscosity are you running? Are you being sure the oil temp is stabilized in your dry sump tank before making the pulls?
  4. GTS Dean

    Upsizing tires for Gen2 rims

    JonB at PartsRack.com knows the tire/wheel fitment intricacies of all gens in & out. Just tell him what wheels you want to use and listen to him carefully. He will guide you in the right direction the first time, and get you the best pricing anywhere.
  5. GTS Dean

    Ground Clearance 2" Air Lift Kit - trying to find the preCovid $750 kit I posted about ...somewhere

    If you have any bump steer issues, this mod will magnify them drastically.
  6. GTS Dean

    Upsizing tires for Gen2 rims

    you can fit something in the 285-295 width on the OE 10" fronts with no issues. Just shop for some that are still ~25.6" tall.
  7. GTS Dean

    Ground Clearance 2" Air Lift Kit - trying to find the preCovid $750 kit I posted about ...somewhere

    Thanks man! A guy I was time-trialing against at the Viper Rendezvous last summer also had a B/W 96 GTS. We were way less than a 10th apart from each other out there, with him just having the edge. He had a 650 hp built motor with junk suspension and a race seat, I have a total street car...
  8. GTS Dean

    Ground Clearance 2" Air Lift Kit - trying to find the preCovid $750 kit I posted about ...somewhere

    Are you saying that the cup OD hits the upper wishbone steel pivot bars in the front?
  9. GTS Dean

    1996 GTS power window

    they are labeled.
  10. GTS Dean

    Was there an AAR edition Viper?

    I think you're looking for e-bodies.org.
  11. GTS Dean

    Coolant in between intake runners

    Wow - a friendly voice from the past!
  12. GTS Dean

    2002 RT10 parts for sale

    Why don't these parts go with the car? Or, is it totaled?
  13. GTS Dean

    Coolant in between intake runners

    Removing the wipers (flip covers & 2x13mm nuts) and cowl (4 phillips screws) will let you see and get to what's at the back of the engine,
  14. GTS Dean

    Coolant in between intake runners

    You are correct. Not easy to get to.
  15. GTS Dean

    1994 RT/10 Idler Pulley fail

    The OE bracket is die cast magnesium. As long as the attachment bolts to the heads, and to the steering pump are torqued properly, the OE brackets are lighter and fully up to the task. Your choice.
  16. GTS Dean

    Largest front tire width?

    315/335 on 12.0/12.5 rims.
  17. GTS Dean

    Largest front tire width?

    I ran 315-35-17 Comp T/A R-1's on my '93 at the track. They really need to be on at least 11" rims. Wider than that, and depending on offset, they'll rub the swaybar at full lock. Even now, I run 315-18 square, or 315/335 at the track. Still roll on 275/335-17's for street.
  18. GTS Dean

    1997 Viper, 4th invitational “Snake Bite Kit” info request

    Drove it home from the oldest Dodge dealer in TX on 7/15/96. Going on 29 years with this one. I traded my '93 on it from the same dealer.
  19. GTS Dean

    1997 Viper, 4th invitational “Snake Bite Kit” info request

    I do that in a day at the track. WFO!
  20. GTS Dean

    1997 Viper, 4th invitational “Snake Bite Kit” info request

    Still have mine stashed somewhere.
  21. GTS Dean

    05 SRT10 T56 to TR-6060 Trans swap what to expect

    I put a light flywheel on my car at about 17,000 miles. It helped my heel-toe downshifting quite a lot. I also noticed it to be much more sensitive in stop/go driving, particularly in freeway traffic because of less flywheel inertia. 25 years and 25k miles later, it doesn't bother me in the...
  22. GTS Dean

    DIY Catch Can Install

    ^correct^ That line keeps your crank case ventilated as the can outlet to manifold is providing the vacuum source for pulling fresh makeup air in. The can drops 95% of oil vapor out of the intake.
  23. GTS Dean

    1999 GTS - Exhaust Manifolds Glowing Red

    On a reflash, your adaptives are all zero'd out. They won't move appreciably without driving some miles unless something is seriously out of whack.
  24. GTS Dean

    1999 GTS - Exhaust Manifolds Glowing Red

    O2s are first check for proper function. Also check OBD tables for extreme adaptive trim settings. Maybe your mufflers are plugging up. Also keep in mind that the later Gen 2's came with thin-wall tubular steel headers instead of cast iron and it may not be uncommon for them to glow at idle. I...
  25. GTS Dean

    Help with Steering Crossmember Measurements

    I was all over and under my car today and remembered to check mine. I measured up to the bottom of the rear-most flange and it was right at 5 inches from the bottom of the square crossmember. The square had to lean slightly backwards at the bottom to touch both.

Latest posts

Members online

Total: 929 (members: 7, guests: 922)

Forum statistics

Threads
153,831
Posts
1,686,594
Members
18,436
Latest member
Primo2013

Share this page

Top