20" wheel owners question!!!

[happy]

Onm y 02 gts just put on iforged 19/20 with eibach lowering springs, seems like im rubbing a bit on the rear. what do guys normally do to fix this problem?? want a adress it before i get a wheel allighnment done !! Thanks!

 

[99 R/T 10]

Replace the 20s with 19s...................................

 

[Mike Adams]

Should not rub I have 21" front and rear not rub. What size rears do you have

 

[Red Snake]

It depends on your tire. If you run an Invo in 345/25/20 you shouldn't be rubbing. If you run the Michelin tire in 335/30/20 you will likely rub.

 

[BlackSnake99]

It depends on your tire. If you run an Invo in 345/25/20 you shouldn't be rubbing. If you run the Michelin tire in 335/30/20 you will likely rub.

This. I run 19/20 on Eibachs. Invos all around. No rubbing and no trouble opening the hood.

 

[dave6666]

PS2's will rub as they do on my car. Solved the issue by letting them rub.

 

[LifeIsGood]

As info...not really helping your issue...my Nitto INVO 345/25ZR-20s don't rub.

 

[Mopar Boy]

The Pirellis I had were 345/25/20 and the PS2s I now have are 335/30/20 (I believe....or were they 335/35.....hmmm. Now I am second guessing myself in my old age). These have touched twice. Now I am lucky as I am an ACR. I can adjust the back end if I needed to but I am guessing due to the stiffer 1100 lbs springs, I don't rub.

 

[costanZo]

I have:

Michelin Pilot Sport PS2, 295/30/ZR19
Michelin Pilot Sport PS2, 335/30/ZR20

and there is ZERO rubbing; however I have KW2's, not eibachs'.

I am considering these as my next set tho:

Nitto Invo, 285/30ZR19
Nitto Invo, 345/25ZR20

 

[ViperGTS]

>>19/20 with eibach lowering springs<<<

You should be fine with driving to the next coffee shop at 30-50 mph that's exactly what the VIPER was built for!

And, please, stop whining about driving issues when you do things like 20" wheels and lowering springs but not a full setup like KW.

 

[dave6666]

And, please, stop whining

This.
.
.
.
.
.

 

[slitherv10]

I have the Pirelli P-Zero rosso set up with the 345/25/20 rears and Aldan American 754 Coil overs and absolutley no rubbing at all. The key is the 25 sidewall profile. If you go 30 you will rub.

 

[happy]

>>19/20 with eibach lowering springs<<<

You should be fine with driving to the next coffee shop at 30-50 mph that's exactly what the VIPER was built for!

And, please, stop whining about driving issues when you do things like 20" wheels and lowering springs but not a full setup like KW.

Not whining big fellow just asked a simple question, before i took it in to have its allighnment done!! And yes 335/30 20 on rear, once there gone will go 345/25 for sure thanks everyone!!!!!!