3-Piece Lemke top identification.

[goes to 11]

I bought this top on Ebay. Ad stated it is for a Gen 2, clearly it is not. I will be re-selling if I cannot get a refund. I need your help so I don't mis-identify it again. Picture are with the top sitting on my 2001 with the front cams locked. The top overhangs the rear by a 2" +- and a huge gap at the "A" pillar and 1/2" at the "B" pillar. Sports pad is removed. The only hardware is 4 of the bars and wing bolts.

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[Cookieman00x]

How about some under shots? if its for a GEN1 I may be interested and I know someone selling a gen2 mach7 lemek

 

[goes to 11]

How about some under shots?

I will get them tonight.

 

[goes to 11]

How about some under shots?

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[InTheZoneAC]

Ebays return policy allows every buyer to return their product, especially if its defective.

Go to purchase history, and select return item. Ebay might ask a few questions in the process but it takes no more than 60 seconds to start and print a return label.

 

[kssssnake]

Profile looks like mine. Screw goes through the hole in the rear bar. Front is flat. Find someone in your club with a gen 1 and test fit it.

 

[yekta]

I have a red 3 piece top for gen 2 available, let me know if interested. It is out of my 02 RT/10

 

[beart9h1v8]

3 piece off of my 2001. Sapphire Blue. needs paint. Located in Alberta Canada

 

[ViperRed]

I have an early Gen1 (93), I may be interested.

 

[goes to 11]

I was able to get a full refund from the Ebay seller. (well except for having to ship it back).