ACR Wing End Plate Size?

[steve911]

Hi again,

I forgot to ask in my last post about the length and height of the ACR Wing end plate.

Would someone take a couple of seconds and measure one for me for my drawing project? It doesnt have to be super precise.

thanks as always for your help.

Steve A.

 

[steve911]

Hi again,

I forgot to ask in my last post about the length and height of the ACR Wing end plate.

Would someone take a couple of seconds and measure one for me for my drawing project? It doesnt have to be super precise.

thanks as always for your help.

Steve A.

Anyone out there with a Gen 3 or 4 ACR that can help?

 

[BlknBlu]

I can when I get home tonight, but they are an odd shape to measure.

Bruce

 

[steve911]

thanks alot for taking the time to do it.

 

[BlknBlu]

Here are the specs on the wing.

13 5/8 on the top edge
8 1/4 from top to bottom measuring just in front of the notch straight down on the rear of the plate
6 1/2 is the rear angle portion from the bottom to the rear edge of the notch
1 3/8 from the front bolt to the top
2 1/4 from the back bolt to the top.

Hope this makes sense

Bruce

 

[steve911]

Thanks very much. Your descritpion makes perfect sense. Now off to the drawing board.....

Steve A.

 

[redtanrt10]

Hey Steve, if your going to the trouble of building your own, build the new ACRX style.