Sniper
Enthusiast
Does the whole airbox need to be taken off to get to the air filter for replacement?
Air Filter Replacement
- Thread starter Sniper
- Start date
Steve M
Enthusiast
Nope...just the lid.
Loosen the 3 bolts on top at the front - should take a 10 mm 6-point socket. The bolts are captive, so at some point they'll just kinda flop over. Once they are loose, you should be able to pull the lid forward a bit and then up, exposing the air filter.
The Purolator A45557 is an OEM equivalent replacement if that's what you're after.
Otherwise, pick your poison.
Loosen the 3 bolts on top at the front - should take a 10 mm 6-point socket. The bolts are captive, so at some point they'll just kinda flop over. Once they are loose, you should be able to pull the lid forward a bit and then up, exposing the air filter.
The Purolator A45557 is an OEM equivalent replacement if that's what you're after.
Otherwise, pick your poison.
OP
OP
Sniper
Enthusiast
I bought a K&N air filter
Seems like I’ll have to take the smooth tubes off also to open the lid.
Seems like I’ll have to take the smooth tubes off also to open the lid.
Steve M
Enthusiast
Yes…the stock accordion tubes have enough flex that you can leave them attached. Smooth tubes, probably not.
OP
OP
Sniper
Enthusiast
OP
OP
Sniper
Enthusiast
I installed opposite of original pic
This is direction I installed…
And this is old air filter…
This is direction I installed…
And this is old air filter…
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
OP
OP
Sniper
Enthusiast
Does the Gen V have an air conditioning/cabin filter?
If so, anyone have a part #?
And where is it?
If so, anyone have a part #?
And where is it?
Similar threads
