All Gen ACR-X Catch Can systems SUPER SPECIAL

[GTS-R 001]

Well, everyone seems to be very aware of the oil being drawn to their valve covers and Catch cans seem to be the rage now.

Here is our latest offering.

Our Catch can is manufactured by Peterson Fluid Systems, the same guys that made the ACR-X catch cans for the ACR X Race Cars

We have gone one step further and complimented the system by adding -8 high pressure fuel lines and Super high quality -8 AN high pressure fittings.

We supply everything and we include a custom bracket for install.

Here are some pics of the system



Installed





We offer 2 different systems, each with a different level of install complexity.

System 1 requires removal and drilling and tapping to accept the pipe fittings on the AN elbows

Like in these pics

System 2 - requires only install of the bracket and includes simpler to install AN looking clamp on fittings, they will work just as well but will aid in a quick install





System 1 cost is $400
System 2 cost is $350

 

[BlknBlu]

so no drilling on system 2. it bolts directly on?

Bruce

 

[GTS-R 001]

so no drilling on system 2. it bolts directly on?

Bruce

Hi Bruce,

Yes, system 2 requires no drilling or tapping of your valve cover,

 

[Hamrhead]

On System 2, how is the 'Bracket' attached?

 

[GTS-R 001]

On System 2, how is the 'Bracket' attached?

Both systems use the same bracket which bolts to the cross member with 2 1.5 inch long stainless bolts, if you are not wanting to drill a couple of holes I can also fabricate a clamp on bracket that would go over the cross member and then bolt to itself out of sight

 

[Hamrhead]

Both systems use the same bracket which bolts to the cross member with 2 1.5 inch long stainless bolts, if you are not wanting to drill a couple of holes I can also fabricate a clamp on bracket that would go over the cross member and then bolt to itself out of sight

Honestly, that's what I want. I really don't want to do any drilling.

 

[Fatboy 18]

Nice

 

[GTS-R 001]

Honestly, that's what I want. I really don't want to do any drilling.

I know exactly what you mean, we either get in the mind frame of all out mods on these cars or mods that can be undone and have the car be a totally stock pristine collector car. It will not be too hard to make the bracket be a clamp on surround bracket I will even add some neoprene rubber to go over the cross member so the bracket does not scratch

 

[drlee50]

Might I suggest an all black -AN and black nylon hose option. Who wants a mix of red and blue and silver in there?

 

[GTS-R 001]

Might I suggest an all black -AN and black nylon hose option. Who wants a mix of red and blue and silver in there?

Easy to do,

"Who wants a mix of red and blue and silver in there?"

I do Damn It! LOL

 

[eucharistos]

another +

 

[Hamrhead]

I know exactly what you mean, we either get in the mind frame of all out mods on these cars or mods that can be undone and have the car be a totally stock pristine collector car. It will not be too hard to make the bracket be a clamp on surround bracket I will even add some neoprene rubber to go over the cross member so the bracket does not scratch

Let us know when you get the bracket made.

I'd also prefer an all Black -AN and hose option. If possible.

Thanks

 

[ACRsnake]

I am interested in a one with no drilling all black System 2 please.

 

[ACRsnake]

Any updates ? Does it benefit street vipers ? that r never tracked

 

[GTS-R 001]

I should have some pics up tomorrow of the no-drill required set up

I was just a little busy with this the last couple of days

 

[ACRsnake]

wow ..........^^^^^^^

 

[M_viper]

Steve, thanks for the catch can.

 

[Magnus_]

I'm a little confused.

If system 2 is cheaper and easier to install, in what scenario would system 1 be the preferred setup?

 

[GTS-R 001]

I'm a little confused.

If system 2 is cheaper and easier to install, in what scenario would system 1 be the preferred setup?

Magnus,

It all comes down to what people want, the drilled out and bolted in AN fittings is definitely a more robust package but as I stated it takes a lot more time to install and due to the added parts required costs more.

 

[Hamrhead]

I should have some pics up tomorrow of the no-drill required set up

http://gallery.viperclub.org/showphoto.php/photo/65823/title/dsc-0005sm/cat/500

Any progress?

 

[GTS-R 001]

Yes,

'll take some pics today, turned out really good

 

[anaconda666]

On a Gen II the valve covers are not vented upwards, the vent out the front which is not good. Have you used this catch can on a Gen II
and how was it installed. Thanks, Ron.

 

[GTS-R 001]

On a Gen II the valve covers are not vented upwards, the vent out the front which is not good. Have you used this catch can on a Gen II
and how was it installed. Thanks, Ron.

I ran a similar one on my 2000GTS that was supercharged and had an exotic engine built engine. I had fittings mounted to teh center top of each valve cover and blocked off the factory holes

 

[Hamrhead]

Yes,

'll take some pics today, turned out really good

Bueller?

 

[ACRsnake]

???any updates and pricing

 

[GTS-R 001]

???any updates and pricing

The system is $400.00, been running for months and works great.

I am shipping only with the NO DRILL mount,