Am I the first???????????????????

Finally got it !

Viper Owner
Joined
Mar 18, 2001
Posts
1,094
Reaction score
0
Well it happened. Came across a C6 Z06 today in speedway 84 in ct. Brand new from Loehman Blasius in Waterbury Ct.
We had three speed contests. Dead stop.Roll on from 30 mph.Roll on from 80 mph.
Anyone want to venture some guesses as to the out comes? Before the Corvette freaks go crazy when seeing this on the board. Yes, I have pics. My car has Corsa exhaust and Random cats. No K&n..
From a dead stop to 120mph. I had a good two car lengths on him. I pulled early then it seemed to level off. Guess the Tc does not help the Vette guys either.
Roll on from 30mph. Again I pulled but this time I may have had him by only a car length or less.We shut down at about 100mph
Roll on from 80mph to about 140mph. I would say dead even or he pulled slighty. Would have been a photo finish.
I am no drag racing specialist. Neither was the porter that I think was driving the Z06. I think this is some true world numbers. The torque down low helps the Viper out of the hole but goes away as the speeds progress.
Nice looking car but still too similar to a regular C6. One thing I did not like was what looked to be rear fender splash guards. Not the same color as the body. Maybe an option but I would definetly have that sprayed or deleted...
 

Casey

Enthusiast
Joined
Mar 24, 2001
Posts
4,662
Reaction score
0
Location
Valparaiso, IN.
Very nice. Sounds like the Vette is everything it's supposed to be.

And we all know the Viper is everything it is supposed to be. And it has the LOOKS!! :2tu:
 

BigCarrot

Enthusiast
Joined
Apr 3, 2002
Posts
2,940
Reaction score
0
Location
Dallas, TX
Sounds pretty neck and neck, but do you think the Z might have the upper hand against a bone stock car???
 
OP
OP
F

Finally got it !

Viper Owner
Joined
Mar 18, 2001
Posts
1,094
Reaction score
0
Sounds pretty neck and neck, but do you think the Z might have the upper hand against a bone stock car???
I haven't had my car dynoed so I don't know what the exhaust system added. But my opinion would be that the Torque makes up for the weight difference down low. After that it seems the Z06 would be the faster of the two.
P.s. I weigh 275 if that makes any difference to you gear heads.....
 

ViperRay

Enthusiast
Joined
Aug 2, 2003
Posts
846
Reaction score
0
Location
Topeka, KS
What gear(s) were you in from 80 to 140?
He might have been in the sweet part of his torque/HP curve there.
 
OP
OP
F

Finally got it !

Viper Owner
Joined
Mar 18, 2001
Posts
1,094
Reaction score
0
What gear(s) were you in from 80 to 140?
He might have been in the sweet part of his torque/HP curve there.

Can't speak for him but I started in 3rd. Stock rearend.
 

Mach10

Enthusiast
Joined
Jun 10, 2005
Posts
245
Reaction score
0
Location
Colorado
Sounds great!!! I offered to bring my Viper (bone stock) to the local chevy dealership once they got the new Z06. I went there just curious about the car and told them about my Viper. They asked if i would bring it by when the Z06 came in and i said i will not only bring it by but i will race the new owner if he wants to go toe-to-toe (even after his break-in period).. Still waiting for that call.. Im ready....
Nice job on the Z06 by the way...

You must be registered for see images attach
 

Ghetto2315

Enthusiast
Joined
Feb 17, 2004
Posts
63
Reaction score
0
Well it happened. Came across a C6 Z06 today in speedway 84 in ct. Brand new from Loehman Blasius in Waterbury Ct.
We had three speed contests. Dead stop.Roll on from 30 mph.Roll on from 80 mph.
Anyone want to venture some guesses as to the out comes? Before the Corvette freaks go crazy when seeing this on the board. Yes, I have pics. My car has Corsa exhaust and Random cats. No K&n..
From a dead stop to 120mph. I had a good two car lengths on him. I pulled early then it seemed to level off. Guess the Tc does not help the Vette guys either.
Roll on from 30mph. Again I pulled but this time I may have had him by only a car length or less.We shut down at about 100mph
Roll on from 80mph to about 140mph. I would say dead even or he pulled slighty. Would have been a photo finish.
I am no drag racing specialist. Neither was the porter that I think was driving the Z06. I think this is some true world numbers. The torque down low helps the Viper out of the hole but goes away as the speeds progress.
Nice looking car but still too similar to a regular C6. One thing I did not like was what looked to be rear fender splash guards. Not the same color as the body. Maybe an option but I would definetly have that sprayed or deleted...


Speedway 84 as in I-84?

Where on 84 was this.... around what exits? I was on 84 the whole day today driving to the Big E

Also, where is Loehman Blasius? I go to school in Waterbury

Nice story :headbang:
 

Gerald

Enthusiast
Joined
Oct 2, 2000
Posts
5,401
Reaction score
0
Location
Near Tampa Bay
Very nice. Sounds like the Vette is everything it's supposed to be.

And we all know the Viper is everything it is supposed to be. And it has the LOOKS!! :2tu:
Are you kidding :) ??? The Z06 vette is supposed to run 11.5 at 127 mph and the Viper beat it by a couple car lengths.. LOL!!
GM is gonna OWN you.. (in more ways than one) ;)
(this isn't meant towards you Casey)

What happened to all the Z06 is gonna OWN the SRT. 128mph in the 1/4, blah blah blah... hahahahah

Gerald
 

Fishtail

Enthusiast
Joined
Jun 10, 2003
Posts
584
Reaction score
0
Location
PA
I didn't even know the Z06 was out yet???? I was betting on a closer race from what you got. I'll be looking for one on the road ahead.
-lou
 

Mopar426

Enthusiast
Joined
May 3, 2004
Posts
840
Reaction score
0
Location
Dallas, Tx
I didn't even know the Z06 was out yet???? I was betting on a closer race from what you got. I'll be looking for one on the road ahead.
-lou

They're not so this was a pencil pushing GM "Big Wig"

I for one TOTALLY believe the story.

1) New Z06 that's not broken in
2) Inexperienced driver of the Z06
3) Modded Viper vs Stock Z06
4) Broken in viper
5) Viper driver who OWNS the car and is more familiar with it

Good kill :2tu:
 

Mach10

Enthusiast
Joined
Jun 10, 2005
Posts
245
Reaction score
0
Location
Colorado
Mopar... I am waiting for a call so i can race a Z06 stock to stock (after proper break-in of course). If that falls through, and you get a Z06, I'll take you on!!!!!!!!!!!!!
 

Mopar426

Enthusiast
Joined
May 3, 2004
Posts
840
Reaction score
0
Location
Dallas, Tx
Mopar... I am waiting for a call so i can race a Z06 stock to stock (after proper break-in of course). If that falls through, and you get a Z06, I'll take you on!!!!!!!!!!!!!

I have NO ambition to buy a Z06, looks too "plain" to me as does the SRT-10
and the coupe. Thus is why I'm looking to purchase a GTS. :cool:
 

sween

Enthusiast
Joined
Jul 20, 2005
Posts
2,389
Reaction score
0
Location
SF Bay Area
mopar, this is a gen 3 forum. almost everyone is going to be in favor of the gen3 viper. so why try and say that the z06 wouldnt tie the viper? yes the viper had minor mods but its a gen 3 forum ,so theres no point tring to start an arguement in the vettes favor. so why bother? :confused:
 

Turbo63

Enthusiast
Joined
Jan 3, 2005
Posts
266
Reaction score
0
The vette is still an ugly looking car - If you numbers are true (and I believe they are) its a great story from an "out of the box" on both cars perspective.
 
OP
OP
F

Finally got it !

Viper Owner
Joined
Mar 18, 2001
Posts
1,094
Reaction score
0
Well it happened. Came across a C6 Z06 today in speedway 84 in ct. Brand new from Loehman Blasius in Waterbury Ct.
We had three speed contests. Dead stop.Roll on from 30 mph.Roll on from 80 mph.
Anyone want to venture some guesses as to the out comes? Before the Corvette freaks go crazy when seeing this on the board. Yes, I have pics. My car has Corsa exhaust and Random cats. No K&n..
From a dead stop to 120mph. I had a good two car lengths on him. I pulled early then it seemed to level off. Guess the Tc does not help the Vette guys either.
Roll on from 30mph. Again I pulled but this time I may have had him by only a car length or less.We shut down at about 100mph
Roll on from 80mph to about 140mph. I would say dead even or he pulled slighty. Would have been a photo finish.
I am no drag racing specialist. Neither was the porter that I think was driving the Z06. I think this is some true world numbers. The torque down low helps the Viper out of the hole but goes away as the speeds progress.
Nice looking car but still too similar to a regular C6. One thing I did not like was what looked to be rear fender splash guards. Not the same color as the body. Maybe an option but I would definetly have that sprayed or deleted...


Speedway 84 as in I-84?

Where on 84 was this.... around what exits? I was on 84 the whole day today driving to the Big E

Also, where is Loehman Blasius? I go to school in Waterbury

Nice story :headbang:
Near the Cheshire exit. Think that is 26. The chevy dealer is the exit before.
P.s. This all happened on a closed course called Speedway 84.. :D
 

Mopar426

Enthusiast
Joined
May 3, 2004
Posts
840
Reaction score
0
Location
Dallas, Tx
mopar, this is a gen 3 forum. almost everyone is going to be in favor of the gen3 viper. so why try and say that the z06 wouldnt tie the viper? yes the viper had minor mods but its a gen 3 forum ,so theres no point tring to start an arguement in the vettes favor. so why bother? :confused:

I'm not trying to arguee anything but the FACTS. Fact is I will NOT be buying a Z06 or a SRT, who is the faster car doesn't concern me. BUT once you analyze the information as I did the SRT clearly had the advantage and won like it should have. Like I said I'm not doubting it took place or that he won.
 

FinalEd357

Viper Owner
Joined
May 18, 2004
Posts
940
Reaction score
1
Location
Michigan
Sounds like good news for team Viper. I was @ Milan Dragway this past Wednesday with the Viper. There was an 06z06, sunset orange, parked. Never ran. Very disappointing. I was curious to see if the driver could get anywhere near the mag posted figures...
 
Top