another nifty lift usage..exhaust removal

[All Blue ACR]

As I have sold my take-off exhaust, it was stuck together like it was welded but I didn't want to beat on it.....

pull it apart... minor tapping at the joints...boing.. badda bing

You must be registered for see images attach

 

[SkyBob]

That's swell.

 

[TowDawg]

Did you have to modify your garage door or the tracks for it to get enough clearance for the car on the lift?
I have 13 ft ceilings in my garage, but my garage door tracks are only 8 ft high. I was thinking about a lift, but I'm not sure if 8 ft gives me enough clearance or if I'll have to start changing other things too.

 

[usurbrain]

I have a 10' garage... and when I put the lift in, I had to mod the tracks. You also have to do the return spring, and also a dummy panel to pull it up higher.

 

[All Blue ACR]

if ya just have to have one....
http://forums.viperclub.org/general...ft-king-lift-i-do-now-pics-2.html#post2779689

 

[01sapphirebob]

A lot of useful info in this link as well.

http://forums.viperclub.org/general-viper-discussion/618164-car-lift-my-garage.html

 

[Ricketts]

I have a Rotary Revolution 4 post in my garage and love it!

 

[v10enomous]

Here's the thread on my lidt install...

http://forums.viperclub.org/general-viper-discussion/633587-dannmar-d7-x-4-post-lift-experience.html

Did you have to modify your garage door or the tracks for it to get enough clearance for the car on the lift?
I have 13 ft ceilings in my garage, but my garage door tracks are only 8 ft high. I was thinking about a lift, but I'm not sure if 8 ft gives me enough clearance or if I'll have to start changing other things too.