Cop Magnet
Enthusiast
'01 rears complete with calipers, mounting bracket, used pads, and good rotors. May have a used set of Brakeman #3's also. You must pick up in Chicago area.
Anyone want my '01 rear brakes, free?
- Thread starter Cop Magnet
- Start date
SNAKE BITE
Viper Owner
if they are the same as gen 1....I'll take them.
99 R/T 10
Enthusiast
They're not the same. 01 has ABS, and are very different.
Last edited:
SNAKE BITE
Viper Owner
ok, better leave them for someone else. Thanks for the offer!
0260in3
Enthusiast
Boy, that's the setup on my '02! That's a sweet offer - it almost makes the drive from St. Louis to Chicago worth it. I'm sure someone from Chicago will take you up on it. But in case they don't, do you know anyone from your area going to Viper Days at MAM this weekend? I think there are a couple of drivers going from St. Louis. That might work.
Terry
Terry
Tom F&L GoR
Enthusiast
Free is a good price.
New ABS rear calipers are ~$110. New non-ABS calipers are ~$450. Go figure.
New ABS rear calipers are ~$110. New non-ABS calipers are ~$450. Go figure.
Cop Magnet
Enthusiast
Tom, could Gen I guy use these?
kcobean
Enthusiast
Cop Magnet, I'll pay shipping if you're willing to throw 'em in a box.
Ricketts
Enthusiast
Makes two of us. Too bad I don't live in Chicago area
Chuck 98 RT/10
Enthusiast
I'll take the rotors.
Dave's Big Brakes
Enthusiast
Everyone please NOTE
Gen2 -01-02 with ABS will NOT fit a Gen1 or Gen2 non ABS
Big Brake Dave
99 R/T 10
Enthusiast
Rotors are the same though, correct? Chuck NEEDS these to STOP!
Cop Magnet
Enthusiast
kcobean, thery're yours if I don't find someone local. I'd really rather not hassle with shipping though.
Dave's Big Brakes
Enthusiast
Rotors are the same though, correct? Chuck NEEDS these to STOP!
Chuck needs a anchor to stop yes front & rear the same on all Gen 1&2 Part Rack has a super deal on rotors right now
Big Brake Dave
Tom F&L GoR
Enthusiast
For the record, I bought a caliper once and it won't fit onto a Gen 1. First, the attaching system is different; a Gen 1 n on-ABS caliper bolts directly to the suspension upright. On the Gen 2/ABS caliper, the caliper attaches to the cage that holds the pads in place, and the cage attaches to the upright. Second, the ABS caliper brake hose bolt is in the middle of the caliper and hits a 17 inch Gen 1 wheel. It would have been nice, since the ABS caliper is a 43mm piston and with a prop valve, would have been a cheaper, easier mod for non-ABS cars.
TrainerDave
Enthusiast
If they work on my 99 ACR I'll take them, I already have brembo's all around and slotted rotors on the front, but it would be nice to have a backup set of rotors, if they will work for my car, I'll take them, I live in chicago.
Cop Magnet
Enthusiast
Sorry, guys, Jay picked them up this weekend. Super nice guy, and thanks again for the Cobra model!
