Carbon Fiber Air Boxes FOR SALE

[GTS-R 001]

Carbon fiber AIRBOXES for sale, aerospace quality carbon fiber not wet layup carbon fiber.
Manufactured by Factory Ten and available through Vipair Performance
12 available for immediate shipping $850 plus shipping

MODIFIED TO WORK WITH ROE SUPERCHARGED CARS!!!
Also work with Naturally aspirated cars and fit perfectly underhood!

PM me, email [email protected], or call Mike at 1-877-486-4461 ext 21

 

[jimandela]

nice!

 

[FE 065]

Love to have one, but $850 for any airbox is too steep for me. Keep me in mind if the price drops please.

 

[Chuck 98 RT/10]

Love to have one, but $850 for any airbox is too steep for me. Keep me in mind if the price drops please.

Same here.

 

[SNKEBIT]

A tick shy of 1k for an air filter box?!?!?!
what's the matter with you people??????????


somebody's got way too much money for a viper.......

 

[Russ M]

Hate to sound like a broken record, but here goes.

DYNO numbers, for $850 it better do more than give my engine bay the carbon fiber look.

 

[GTS-R 001]

RUSSM,

Thanks for your always pessimistic and negative viewpoint, this is the same H box that has always sold for 1300usd, it is now modified to fit better and with Roe superchargers. This is made from preprig carbon fiber which as you know has the best ratio of resin to carbon, it is not wet layup carbon fiber which is usually mostly resin and has less strength. unfortunately you get what you pay for with carbon fiber products.

Thanks

Steve

 

[Mike Adams]

I was selling Carbon fibre air box's made by Factory 10 and I can tell you Steve is not overcharging.

Carbon fibre is expensive when done right

 

[Russ M]

RUSSM,

Thanks for your always pessimistic and negative viewpoint, this is the same H box that has always sold for 1300usd, it is now modified to fit better and with Roe superchargers. This is made from preprig carbon fiber which as you know has the best ratio of resin to carbon, it is not wet layup carbon fiber which is usually mostly resin and has less strength. unfortunately you get what you pay for with carbon fiber products.

Thanks

Steve

Negative? Pessimistic?

I just asked the obvious, what ARE the actual benefits?

I am aware it is carbon fiber and I am aware you need to sell it, so lets hear the hp/torque gains.

PS. H box? Does that mean you copied his design?

 

[GTS Dean]

did someone say VipAir?

 

[GTS-R 001]

RUSSM,

H box means that these are made by factory 10, the guys who really designed and made the [******] box. And yes they got screwed by JH too.

 

[RedGTS]

Well, I can see some of the usual suspects gathering. I'm telling you right now I'm gonna seek an injunction if this thread goes north of 3 pages. . .

 

[Russ M]

I am sorry,

Maybe I did NOT make my self clear what is the HP/TORQUE increase again?

Thanks
Russ

 

[GTS-R 001]

RUSSM,

I did not claim a horsepower increase, maybe you can buy one and manipulate your dyno numbers again.

Oh, and by the way, the carbon fiber door sills and cowls do not have a horsepower claim on them either, but I am quite sure that you could make it either look like they do or don't on a dyno!

Is this clear RUSS?

 

[Russ M]

Great, thanks for the answer. 0 hp gain like the rest of you products, at least you are consistent.

Manipulate hp?

Are you insinuating that I altered the dyno numbers at a dyno that I do not own or opperate? To what end? So are you saying that the dyno where DC gets all there testing done is in some way conpiring against you?

Get a life Edmonton, I have no hidden agenda against you guys specificaly. Its against anyone who makes claims and NEVER backs them up.

If you believe I in any way altered or manipulated all the dyno passes I made, you are a bigger fool then I previously thought.

PS. Next time SoCal is having a dyno day I will come down with your your piece of plastic and place it on several vipers so they can see how the Vipair creates the special air duct at the tune of 0 hp gain.

 

[Martin D]

Looks very nice! Too bad I already have one......
Thanks for making these available.

Regards,

 

[STUGOTS]

russ what are your dyno's are they like so impressive or something that this guy belives u faked em?

BTW how could u fake a dyno?

 

[Russ M]

Stugots,

look up Vipair, and go through the thread.

Basicaly this guy and his comrades claimed 50hp gain from their plastic wheel chok. So I took it to the dyno on several occasions to show how it gained an absolute 0.

They didnt like that, so now I am a liar according to them.

 

[STUGOTS]

ohhh i got ya well i know 1 thing i am glad you do that type of thing and test everything that way we know before we buy so on behaf of all viper owners

THANKS MAN

 

[GTS-R 001]

Russ,

You are considered a liar because you are one. You lied to me and you know it.

When you and I talked on the phone after you did your initial dyno tests with your FREE Vipair™, you admitted that you did not know how to do the tests and that is why you had a 90 mph fan blowing directly into the NACA duct for all the tests. You admitted to me on the phone that this was an incorrect method and that you would test correctly the next time. It was at that point that I offered to buy a Gtech for you to test with on other than the dyno and you agreed to do this as well.

Russ we all saw how you could strap your car onto a dyno and have numbers vary by 30 - 40 hp between runs. It is quite odd then how when you dynoed with the vipair the second time you did not simulate the initial tests, except for removing the 90 mph fan from the NACA duct, instead you did just one dyno run and claimed IT DOES NOT WORK! Why didn't you test it the VIPAIR™ properly the second time like you told me you would Russ?

Pretty thorough there Russ.

So Russ, let's see

The Vipair does not work ( you by the way are the only person to have a zero gain result on a dyno )

High Flow air filters do not work ( Why don't you post negative comments on other suppliers promos like Dan Craigan high flow Green post? )

Smooth tube and high flow filters do not work ( I guess chrysler lied to all of us about the power increases on the ACR package and GT2 package, right Russ? )

Russ, you never did do the Gtech tests did you? No, you didn't and I had to call and email you numerous time just to get you to return the Gtech months later, didn't I Russ?

Russ, why don't you just let laying dogs lie? You have no need to try to disturb a post about a completely different product than the Vipair, I think it is time for you to mature a little and move on, Russ.

Thanks

Steve

 

[VPRVENM97]

Steve,

I have a Fluidyne oil cooler sitting on top of my radiator. From the pics below, can you tell if I would have any fitment problems with your CF airbox. As you can see, I had to modify the stock airbox to clear the AN fittings. Does the $850 include the Vipair and are the airboxes available without the "Vipair" plaque on them?

Thanks,
Dave

 

[Russ M]

Edmonton,

You should re read the whole Vipair thread cause obviously you missed all the dyno pulls made.

I had better things to do than to go out to UPS and send you the gtech meter, which I did send out to you maybe a few weeks late. And that is only because I was still trying to make it replicate consistent enough numbers.

Last time I looked the ONLY verifiable dyno pulls were made by me, and no one else. Unless you count the pulls with the 50rwhp SOTP comments, which obviously had serious flaws.

Like I told you before my testing would be fair, and I was excited about your product actualy working. It didnt, but you cant live with that. You should at least go out and doctor some dyno pulls at least that way some of your loyal customers can feel better about their purchases.

Smooth tubes and K&N's do not add the claimed 10hp, next time you are at a dyno try it. O wait I forgot you dont test anything you make, all that counts is how it looks.

The whole point of forums is to ask questions, and I think that mine was very legitimate considering the product being offered. If you dont like it perhaps you should stop trying to sell products that are power oriented, and start knocking off more H*M*S body parts.

 

[GTS-R 001]

Dave,

The carbon boxes are available without the Vipair™ logo on them, this is actually the top portion of a rain baffle we devised for the Factory Ten box. The Vipair™ piece is not included in the price, the Viapir is an extra $100 of ordered with a carbon airbox.

Our carbon boxes have multiple mounting holes drilled into them for better fitment, if you would like you can try a box to see if it fits with your rad fittings and if it does not you can return it for a full refund.

Dave you can email or PM to arrange for a box.

Thanks

Steve

 

[GTS-R 001]

Russ M,

I know, I know, nobody else knows how to do a dyno pull except for you!

I Know, I Know, Everybody who has ever posted on this board who dynoed with K&N's and smooth tubes did it wrong if they got a positive result!

Little did we all know that you are the only guy who can verify dyno results, now we know!

Thanks for your input Russ,

Steve