Congrats (Shelby3) - 793rwhp and 908rwtq

[Larry Macedo]

BTW, Gary A. commented today on the very nice condition of your new ride, Jim. THANK YOU!

 

[Simms]

NICE!!! Whats the mods Larry?

 

[Larry Macedo]

Hello Ian,

Jim's modifications are a Roe Blower, Roe Heads and Cam, Belanger Headers w/Borla Cat-Back, Arrow 1.7 Rockers, 70mm TB's, 3" Smooth Tubes and a Modified Stock Airbox which is soon to be replaced with our Airbox. Oh, and our M2 Wet Shot Nitrous System. The killer for this package is the inherited 3.73 final gear ratio which isn't long for Jim's Viper.

Keith, the previous owner of the Viper, had a small problem with the damper spinning on the crankshaft so badly the crank had to be replaced. The Viper has 27,*** miles on the odometer when we pulled her apart. Subsequently, we found some small grooves on the cylinder walls and had a light hone performed on the block. Essentially, it's a fresh motor for Jim.

 

[Simms]

Impressive package! The numbers show you guys did an awesome job for Jim.

 

[fast?]

nice #'s. how big of a shot are you runnung in his car?

 

[Simms]

Larry, can your airbox be used without the supercharger and 70mm throttle bodies?

 

[VinR1]

without pulling the crank and honing work, how much would a package like that cost?

 

[Larry Macedo]

nice #'s. how big of a shot are you runnung in his car?

Hello Fast,

It's a conservative amount of nitrous, we could have squeezed out a bit more, but the motor has barely 100 miles of break-in time clocked.

 

[Larry Macedo]

Larry, can your airbox be used without the supercharger and 70mm throttle bodies?

Hello Ian,

Our Airbox was built solely for the Roe S/C, although in the near future we will be making a few changes so it can be utilized in a few different scenarios. Thanks!

 

[Larry Macedo]

without pulling the crank and honing work, how much would a package like that cost?

I would be more than happy to Email a quote to you, Sir!

 

[Shelby3]

without pulling the crank and honing work, how much would a package like that cost?

I would be more than happy to Email a quote to you, Sir!

I believe Larry's shop hour rate of $35 is more than reasonable.

 

[Larry Macedo]

LOL! That is about what it broke down to regarding someone we know and love! BTW, Jim, THANK YOU for the opportunity to serve you, Sir. Did you drive your new baby with the nitrous "ON" yet?

 

[Simms]

Larry, can your airbox be used without the supercharger and 70mm throttle bodies?

Hello Ian,

Our Airbox was built solely for the Roe S/C, although in the near future we will be making a few changes so it can be utilized in a few different scenarios. Thanks!

Thanks Larry. Keep me posted on the valve covers.

 

[fuelman]

Another impressive M2 car. Jim your gonna like this package. Try full throttle 3rd, 4th and 5th on the juice, it is a EEE ticket. Congrats.

 

[Shelby3]

Another impressive M2 car. Jim your gonna like this package. Try full throttle 3rd, 4th and 5th on the juice, it is a EEE ticket. Congrats.

I believe you John. It's crazy enough with just the 3.73 gears on blower only. No opportunity for the juice yet, need to take it to the strip for that action.

You must be registered for see images

You must be registered for see images

 

[Cudaman]

Is it a masterpiece?

Cudaman

 

[MKB96Viper]

Hey Jim & Larry,
Congrats!! Those are some awesome numbers!!
I am sure you will enjoy your new ride!!

Keith

 

[Shelby3]

Hey Jim & Larry,
Congrats!! Those are some awesome numbers!!
I am sure you will enjoy your new ride!!

Keith

Thanks Keith, you have mail.

 

[CMilViper]

Wow....Awesome pictures!