EBC Greens

GimmeTheSpeed

Enthusiast
Joined
Nov 11, 2004
Posts
246
Reaction score
0
Location
Sacramento, Ca.
I did my topic search, and I gathered that the main debate would be stopping performance... well I don't track my car, not even as much as the 1/4... I have a new set of stock pads on and like most I sound like a freight train stopping when I hit the brakes... I was wondering if anyone who had the Greens has ANY squeal? are they THAT good? even if the Greens caused the same amount of dust I'd be ok, but the squeal from the stocks are killin me! I'm willing to dump the new pads and switch to Greens if it makes that much difference... thx for the info :)
 

FikseGTS

Enthusiast
Joined
Oct 4, 2000
Posts
1,281
Reaction score
1
Location
South Florida, USA
I have them on my car with the eradispeed rotors, no squeal, minimal dust.... car stops fine on the street with them, I haven't been road racing or autocrossing with them yet.....
 

Rollin4

Enthusiast
Joined
Jul 24, 2003
Posts
581
Reaction score
0
Location
Anacoco, La.
The green's will eliminate the squeal and dust problem. You will notice they don't stop as good as stock pads. They are sufficient for street use but for track use get something else. Prep your rotors prior to installing the EBC's.
 

Randy

Viper Owner
Joined
Feb 7, 2004
Posts
1,058
Reaction score
0
Location
Earth?
The green's will eliminate the squeal and dust problem. You will notice they don't stop as good as stock pads. They are sufficient for street use but for track use get something else. Prep your rotors prior to installing the EBC's.
Actually, in my experience, they stop better than stock pads on the street, and are much better for autocrossing, as they allow you to modulate the brakes right at lockup better. Net win for me in all departments - half the price and don't wear out in half the time (they do wear out slightly faster, but, for half the price thats fine with me), less dust, better stopping, and dropped times in autocross noticably.

I used EBC greens on my '95 for probably 40k out of 70k miles, and put them on my '00 within a week after I bought the car 14k miles ago.
 

plumcrazy

Enthusiast
Joined
Jun 9, 2003
Posts
16,243
Reaction score
7
Location
ALL OVER
no squeel and work just fine. i painted the backing plate BLACK so ya dont see that ugly green thur the wheel.
 

01sapphireGTS

Enthusiast
Joined
Mar 22, 2004
Posts
678
Reaction score
0
Location
North Canton, OH - USA
I installed Greens without prepping the stock rotors and have just as much dust and just as much squeal as OEM.... <- my fault

CitySnake: The reason it bothers me is it will take me almost a decade to drive 5000 miles, but when I do drive it I don't want to be embarrased by the factory installed sqeal.
 

Catwood

Viper Owner
Joined
Aug 14, 2002
Posts
1,470
Reaction score
0
I switch to greens on the front and my original OEM on the rear between track events. I don't prep the rotors. When they were new they didn't squeel and they still don't. Dust is down from the OEM.

Stopping seems fine for my needs.
 

JiPi

Enthusiast
Joined
Aug 19, 2005
Posts
360
Reaction score
0
Location
Geneva, Switzerland
I installed Greens without prepping the stock rotors and have just as much dust and just as much squeal as OEM.... <- my fault

CitySnake: The reason it bothers me is it will take me almost a decade to drive 5000 miles, but when I do drive it I don't want to be embarrased by the factory installed sqeal.


What do you mean exactly by "prepping the stock rotors"?
 

Steve-Indy

VCA Venom Member
Venom Member
Joined
Oct 2, 2000
Posts
8,622
Reaction score
223
Location
Zionsville,IN. USA
Scuffing them thoroughly...I use an electric drill and a 3 inch sanding disc (about 100-120 grit).

here's my old post:

"Here,s the info, Jim. I use 3M "Brake Rotor Surfacing Discs" ("Drill Mounted Starter Kit")...part number 01410....often stocked by your friendly SnapOn man...especially here in Indy!! The discs are 3" in daimeter, and are 120 grit...9 come in starter kit...as well as "orbital" type backing plate. I generally use 1-1.5 discs per Viper...great result, big time saver (you can leave front rotors in place)."
 
OP
OP
G

GimmeTheSpeed

Enthusiast
Joined
Nov 11, 2004
Posts
246
Reaction score
0
Location
Sacramento, Ca.
awesome, thanks guys.... I'll be picking some up.... the squeal those stocks make is unbelievable lol

You are selling anyway stll right?

I guess you can say I'm gauging interest, but by far do not need to sell... I just lowered to 47,900... and I do have a min amount that I'd except, if I don't get it I will absolutely just keep it... I'm only selling to play with another toy... (black on black, maybe ACR..???) or something of that nature :)

Throwing some EBC greens would help whether I keep OR sell... the squeal irritates me so I'm sure it would irritate a buyer... and since I'm not dead set on selling... I'll still be getting bit by the mod bug!
 

BLWNV10

Enthusiast
Joined
May 11, 2005
Posts
222
Reaction score
0
EBC Green Stuff will dust for a while. If you get dust in the beginning just keep on driving. Follow break in procedures.
Love the Green Stuff :)
 

Members online

No members online now.

Forum statistics

Threads
153,566
Posts
1,684,648
Members
18,130
Latest member
Andyk753
Top