For those with different gears

[eucharistos]

http://forums.viperclub.org/rt-10-gts-discussions/621487-3-55s-3-54s.html

ok, so just re-read the 61 posts

thanks for the link btw

so which is it, where to buy, cryo and polished or not, abs an issue

also, 3.33 final or 3.55/3.44 (i'll keep stock 02 tire size & don't plan on fi )

finally, would y'all trust hen_____see for this, i'm local and poop is he's ok with locals

tia

 

[2001 GTS]

So what about 600rwhp NA...3.33 or 3.55???

 

[1TONY1]

So what about 600rwhp NA...3.33 or 3.55???

3.55's
From a 3.07 to a 3.33 just isn't very much of a jump. Now if we were starting like a lot of cars with a 2.73 then I might reconsider.

 

[QUICK SILVER]

** much does that cost I will go to 3.55

 

[Mopar Boy]

I believe I was $900 including install by the dealer. Believe the Mopar gears were about $250 or so of that....

 

[eucharistos]

I believe I was $900 including install by the dealer. Believe the Mopar gears were about $250 or so of that....

are our diffs "standard" enough for this to be a dealer install

tia

 

[eucharistos]

1 more ???

i bought my rt used, and don't know if rear gear is stock or not

anyone handy with one of those calcumalators pls help

in 6th @ 1500 rpms, i'm doing about 73 mph, sound like 3.07's??

tia

 

[dave6666]

1 more ???

i bought my rt used, and don't know if rear gear is stock or not

anyone handy with one of those calcumalators pls help

in 6th @ 1500 rpms, i'm doing about 73 mph, sound like 3.07's??

tia

DIY

SS %23670 with MM6 manual and GU6 3.42 gears

But as I just DIFY, I'd say yes you have a 3.07:1.

 

[2001 GTS]

3.55's
From a 3.07 to a 3.33 just isn't very much of a jump. Now if we were starting like a lot of cars with a 2.73 then I might reconsider.

Cool...that's what I ended up ordering!

With these 19s...IIRC, it comes out to be somewhere around a 3.40.

 

[eucharistos]

DIY

SS %23670 with MM6 manual and GU6 3.42 gears

But as I just DIFY, I'd say yes you have a 3.07:1.

thanks dave for the DIFY,

i looked at the link you included and would still be scratching my head until i could get to the garage with a measuring tape

 

[dave6666]

thanks dave for the DIFY,

i looked at the link you included and would still be scratching my head until i could get to the garage with a measuring tape

I defaults to all the correct gears (but not the R&P) and the factory 18" tire size Gen 2.

 

[1TONY1]

1 more ???

i bought my rt used, and don't know if rear gear is stock or not

anyone handy with one of those calcumalators pls help

in 6th @ 1500 rpms, i'm doing about 73 mph, sound like 3.07's??

tia

Jack it up, turn the (rear) tire one turn and see how many turns the drive shaft makes.