Gen 1 & 2 Diffuser Blade interest?

[KNG SNKE]

I have been emailed by a couple folks asking if I still make these diffuser blades. This post is to see if there is interest in me producing another batch of them. Last batch sold in a record week but it was fairly quiet afterwards. I get about 12 sets of diffuser blades per batch and would need a minimum of 5 orders before I will produce a batch. Below is what the pricing would be as well as photos to cars that have the blades installed. If your interested please let me know and those who have contacted me already please contact me again because I don't have your PM's anymore.

Pricing
4 shipped no coating 100
4 shipped black powder coating 120
6 shipped no coating 140
6 shipped black powder coating 170

Writeup
http://forums.viperclub.org/threads...-Diffuser-Blades-Write-Up?highlight=kng+blade

Walkaround with blades
http://www.youtube.com/watch?v=JP5Y...DvjVQa1PpcFOvVy5pSzszp_XA46rBTe8mFkNaxGf_vOo=

Link to album
http://s138.photobucket.com/albums/q270/pollup/Diffuser Blades Viper/?start=all

Photos

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[KNG SNKE]

4 Folks interested thus far. Need 1 more for the preorder.

 

[MoparBoyy]

i will take a set of 4 p-coated black please!

 

[01viper4me]

6 with powder coating for me

 

[KNG SNKE]

Those who have contacted me have been emailed instruction. The blades are going to go back into production and will be available within 3 weeks roughly. If anyone else is interested shoot me a message and I will get you on the buy in. I get roughly 12 sets of blades per batch and 6 sets are spoken for already.

 

[KNG SNKE]

Awaiting payment on 2 sets then placing the order.

 

[KNG SNKE]

2 orders backed out. Waiting on payment for 1 and need one more preorder. If I don't receive the preorder in 1 week all payments will be refunded.

 

[ILLKing]

6 with no coating for me

 

[KNG SNKE]

PM has been set with info.

 

[KNG SNKE]

1 preorder left to start production run. 32 individual blades left for this batch so 8 sets of 4 or 5 sets of 6 remaining.

One thing to note, uncoated blades are only offered in the preorders. Once the batch is picked up the remaining batch will be dropped off for powder coating.

 

[azvipermike]

awesome product and easy to install!

 

[KNG SNKE]

Payment for the 5th preorder completed last night, these are going back into production today.

Current orders

2 sets 6 blade black
3 sets 6 blade uncoated


26 individual blades left.
That leaves me 6 sets of 4 or 4 sets of 6 blades left. If your interested shoot me a PM, supplies with each batch are limited and tend to go fairly fast.

And some more photos

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[KNG SNKE]

Current orders

2 sets 6 blade black
3 sets 6 blade uncoated
2 sets 4 blade black

18 Individual blades left for purchase so either 3 sets of 6 or 4 sets of 4.

 

[MoparBoyy]

can't wait for my 6 blades!

 

[KNG SNKE]

14 individual blades left. 3 sets of 4 or 2 sets of 6 remaining for preorder, rest of the batch has been paid for. Estimated time to have the batch done and shipped is less than 3 weeks.

 

[bjornjson]

I am in for 6 blades. Black coated
Best regards,
BJ

 

[KNG SNKE]

PM has been sent bjornjson. I am down to 14 individual blades and I am awaiting payment on a set of 4 out of those blades so once payment clears you will have your set reserved.

 

[KNG SNKE]

Only 1 set of 6 remaining from this batch. They can be coated or uncoated until Monday. After Monday they will be coated.

Uncoated 140 shipped
Coated 170 shipped

 

[KNG SNKE]

All blades from this batch have been claimed.

There was at least another 6 people who claimed they wanted a set but didn't send payment. If you were one of these folks and still are interested in a set please let me know. Once this batch is closed out and shipped I will do another batch if I hit 5 preorders again.

Update on the blades, they are being delivered now and will be dropped off Tuesday or Wednesday for powder coating (those ones that wanted them coated)

For those of you who have picked up blades from me can you email me photos? I seem to be missing a lot of my photos.

 

[KNG SNKE]

Update.

Those who purchased powder coated blades your blades have been dropped off on Wednesday and I am told 1-2 weeks for them.

The uncoated blades have been shipped to me already and will be mailed out as soon as I receive them.

 

[ACR_Matt]

Awesome! I am really looking forward to doing this project!

 

[01viper4me]

looking forward to these!

 

[Ataim]

Any left? I'd like a 6 blade set if available

 

[KNG SNKE]

This set is currently sold out. I have 1 other person definitely interested in a set so if I get another preorder of 5 sets after I ship all of these I can make another set.

 

[KNG SNKE]

All uncoated blades from this set shipped today. Please check your email for tracking numbers.

Still on hold for the black powder coated blades, waiting on the power coater to complete the set.

 

[KNG SNKE]

Just got off the phone with the powder coaters, the blades will be done late next week and will be shipped to me for distribution then.

 

[KNG SNKE]

Blades are done being powder coated and will be shipped to me today. All orders will ship out the day the blades arrive to me.

 

[MoparBoyy]

Blades are done being powder coated and will be shipped to me today. All orders will ship out the day the blades arrive to me.

NICE! looks like these will beat my Autoform Lemans wing onto the car.

 

[impalassed]

next go around I'll do a set of 6 coated.

 

[KNG SNKE]

All diffuser blades have been shipped.

Who is interested in a set for next batch?

1.Ataim
2..Implassed