DC Performance is happy to announce that we now have SCT hand held programmers available for all Vipers 1996-2006. All of our previous calibrations will be available as well as our custom calibrations (done from your dyno sheets).
We would like to thank everyone for your patience; we wanted to wait to release our version of this product once we could support all of the Viper part numbers, as of just a few days ago, there were a couple of part numbers not supported in the SCT software.
For those who do not know what a SCT flash programmer is, here is a brief explanation. This flash programmer is sold by SCT approved dealers/tuners.
It allows the customer to download a new calibration into their computer that the dealer / tuner (DC Performance) has developed. This saves the hassle of shipping your computer back and forth or having to buy a spare ecu and having it flashed. The programmer will also allow you to read and erase trouble codes, reinstall your stock program or chose from up to two additional programs if you wish (high octane fuel, low octane fuel, valet mode, are some examples.)
Although not currently supported, in the near future SCT should be adding additional features to the handheld programmer. Some of these are:
LIVELOAD: allows the tuner to e-mail new tuning files that the owner can upload into the handheld programmer themselves via a standard USB cable, saving the hassle of sending the programmer back to the tuning shop.
LIVEUPDATE: allows the customer to update to firmware of the handheld programmer when they become available.
LIVELINK: this is the SCT datalogging software. If the ford Livelink software is any indicator, this software should be very powerful, and
much faster than anything that’s out there right now for the DCX vehicle lineup. In addition, there should be the option of inputting two
analog inputs to the hand held for logging external channels, such as
EGT, boost, air fuel ratio, etc.
End user adjustability, on other SCT handheld product’s, the tuner has the option adding in certain adjustable parameters. Some of the parameters I
imagine they will add are: rpm limiter, shift points, idle speed , ignition timing, fuel adjustments, and so on.
What will set DC Performance apart from everyone else when it comes to this product? The answer is value. First off, all of our programs are proven and have been on vehicles for some time now. There is no learning curve at this point for us. We currently offer all of our programs (including forced induction) with all the benefits (cooler running, raised rev limit, torque management delete, etc) people have come to expect. You the customer will get all this for a price that is competitive with other vendors out there that have just started to tune these vehicles. In addition, many of our calibrations are done, and have been done, in real time, on the Dyno, using our special tuning system, which is something that no other Viper tuner has.
PRICING:
Standard Calibrations: $ 699
(including programmer)
Current Customers: $ PLEASE call, as we are offering special pricing that cannot advertise.(gives you all the advantages of the programmer and the ability to change back to stock)
· Custom calibrations are extra.
· 172 degree thermostat recommended.
· Calibrations are for "off road use only"
We will still offer our current computer programming for those who do not want a flash programmer now at a new lower price.
Dan Cragin
DC Performance Inc.
310-841-6996
We would like to thank everyone for your patience; we wanted to wait to release our version of this product once we could support all of the Viper part numbers, as of just a few days ago, there were a couple of part numbers not supported in the SCT software.
For those who do not know what a SCT flash programmer is, here is a brief explanation. This flash programmer is sold by SCT approved dealers/tuners.
It allows the customer to download a new calibration into their computer that the dealer / tuner (DC Performance) has developed. This saves the hassle of shipping your computer back and forth or having to buy a spare ecu and having it flashed. The programmer will also allow you to read and erase trouble codes, reinstall your stock program or chose from up to two additional programs if you wish (high octane fuel, low octane fuel, valet mode, are some examples.)
Although not currently supported, in the near future SCT should be adding additional features to the handheld programmer. Some of these are:
LIVELOAD: allows the tuner to e-mail new tuning files that the owner can upload into the handheld programmer themselves via a standard USB cable, saving the hassle of sending the programmer back to the tuning shop.
LIVEUPDATE: allows the customer to update to firmware of the handheld programmer when they become available.
LIVELINK: this is the SCT datalogging software. If the ford Livelink software is any indicator, this software should be very powerful, and
much faster than anything that’s out there right now for the DCX vehicle lineup. In addition, there should be the option of inputting two
analog inputs to the hand held for logging external channels, such as
EGT, boost, air fuel ratio, etc.
End user adjustability, on other SCT handheld product’s, the tuner has the option adding in certain adjustable parameters. Some of the parameters I
imagine they will add are: rpm limiter, shift points, idle speed , ignition timing, fuel adjustments, and so on.
What will set DC Performance apart from everyone else when it comes to this product? The answer is value. First off, all of our programs are proven and have been on vehicles for some time now. There is no learning curve at this point for us. We currently offer all of our programs (including forced induction) with all the benefits (cooler running, raised rev limit, torque management delete, etc) people have come to expect. You the customer will get all this for a price that is competitive with other vendors out there that have just started to tune these vehicles. In addition, many of our calibrations are done, and have been done, in real time, on the Dyno, using our special tuning system, which is something that no other Viper tuner has.
PRICING:
Standard Calibrations: $ 699
(including programmer)
Current Customers: $ PLEASE call, as we are offering special pricing that cannot advertise.(gives you all the advantages of the programmer and the ability to change back to stock)
· Custom calibrations are extra.
· 172 degree thermostat recommended.
· Calibrations are for "off road use only"
We will still offer our current computer programming for those who do not want a flash programmer now at a new lower price.
Dan Cragin
DC Performance Inc.
310-841-6996
Last edited:
