Headlight assembly

[V1p3rSRT10]

Hi everyone.
Could you help me please?
1)      I might have to replace the headlight assembly for a Viper 2006, I don’t want to mess up with the bumper but I think I’ll have to.
Is there any way to avoid the bumper removal?
2)      when I got my Viper, the projector headlight was not aligned so I try to aligned but it seems that its broken from inside or something, I was told that the only way to fix
It is to replace it with a new assembly, any ideas?? Thank you

 

[Wiretech]

You have to remove the top inner fender above the wheel, also the wheel should come off for more room,remove the top fender screws 5/16 bolts just the first four,from the wheel well remove 2 nuts and bracket from fender to bumper then remove 3 screws that holds the headlight assembly ,then lift up the top fender lift up the headlight then out into the wheel well.

 

[Canyon707]

its pretty easy to do from the inside of the fender well. I replaced both my headlights in just over an hour. My lens were cracked from using the tint film. There expensive.....

 

[aqwut]

I will have to do this, my passenger side headlight seem to be stripped. it will only adjust down, but not up. And, I need it to go up some more.