How low can you go?

[ZDigital1]

I have purchased the K&W Shocks & Springs and will be mounting HRE 542R (19/20")Wheels. I need some recomendations on how low I can go? I only do typical street driving and understand the speed bump and driveway issues. Any suggestions would be grateful!
Scott

 

[zorroespanol]

Only you can decide that. Do you mind hitting some speed bumps? do you drive exceptionally bumpy roads? steep driveway/parking lots?

With 19/20's I'd go as low as possible, unless I had some of the problems above... my $0.02

 

[ZDigital1]

Thanks for replying! I live in Illinois so the roads are not the best. As far as speed bumps, I avoid streets that have them. Are there any issues as far as the turning sarply and having the tires rub the inner fenders?

 

[Photog1]

Hey Scott doing a little work on the Viper? Put on air shocks for those bumpy roads.
On a different note there are a few of us that are looking to do some viper get togethers in central illinois would you be interested?
Rob

 

[Gerald]

I've just went thru this. Had to adjust - readjust about 7 or 8 times. It's amazing what 1/16" of an inch can do. I've got CCW505A's on my black SRT10 and it's dropped and it looks M E A N ...

 

[ILLSMOQ]

If you go for the slammed look, it will scrape. There is no way around it. I like mine real low and just cringe a little when I enter/exit steep drive ways or go over speed bumps.

My rear tires will rub the top of the fender well if I hit a large dip on freeways or running at higher speeds.

 

[Newport Viper]

If you go for the slammed look, it will scrape. There is no way around it. I like mine real low and just cringe a little when I enter/exit steep drive ways or go over speed bumps.

My rear tires will rub the top of the fender well if I hit a large dip on freeways or running at higher speeds.

Got pics?

 

[VIPER D]

If you go for the slammed look, it will scrape. There is no way around it. I like mine real low and just cringe a little when I enter/exit steep drive ways or go over speed bumps.

My rear tires will rub the top of the fender well if I hit a large dip on freeways or running at higher speeds.

Got pics?

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

vd..

 

[Newport Viper]

Very cool.

What's it measure at it's lowest point under the nose?

 

[VIPER D]

I am tooooo scared to measure. If I do, I just might come to my senses.




vd..

 

[ILLSMOQ]

I think D's might be lower than mine

 

[ViperCrazed]

I think D's might be lower than mine

god, those wheels are beautiful.......

 

[VIPER D]

ILLSMOQ


looking good


vd..

 

[ZDigital1]

Great images! Thanks for sharing. Any issues regarding sharp turns?

 

[Newport Viper]

I think D's might be lower than mine

Best looking SRT I have ever seen! However, I am partial to my silver 4x4.

 

[YellowViperSRT10]

Here are pics when i had my KW V2 coilovers. I just swaped them out for a set of DLM coilovers.

With the DLM coilovers i set the car a tiny bit higher in the front and lower in the rear then these pics you see here.

You must be registered for see images

You must be registered for see images

 

[ILLSMOQ]

Very cool.

What's it measure at it's lowest point under the nose?

3.25 inches under the nose.

lowest point on the car would be the front jack point at 3 inches.