Joeseph Dell update on the quaife GP?

Joseph Dell

Enthusiast
Joined
Oct 2, 2000
Posts
3,463
Reaction score
0
Location
Atlanta, GA 30338
No one PM'd me or emailed me so I didn't even know this post was here! Sorry for my slow response!

Two vendors left me high-and-dry even though they had both committed to supporting a group buy. Put another way, no good deed goes unpunished. I only have about 40 hours of wasted time on this... but I'm not bitter. ;)

My strongest recommendation right now is to call Devon @ Unitrax to get the TrueTrac instead of the Quaife. It is the same thing except it is made by a different vendor. It costs over 1k less than the Quaife and is equally reliable. Devon can be reached at 800-622-4327 or 714-630-4327 .

As for a Quaife, Devon has some of the best prices on Quaife as well. Just tell him you are a VCA member and that I sent you. He'll take care of you.

Good luck!

Joseph


 
OP
OP
I

ILLSMOQ

Enthusiast
Joined
Nov 27, 2005
Posts
1,885
Reaction score
0
Location
SAN JOSE, CA
No one PM'd me or emailed me so I didn't even know this post was here! Sorry for my slow response!

Two vendors left me high-and-dry even though they had both committed to supporting a group buy. Put another way, no good deed goes unpunished. I only have about 40 hours of wasted time on this... but I'm not bitter. ;)

My strongest recommendation right now is to call Devon @ Unitrax to get the TrueTrac instead of the Quaife. It is the same thing except it is made by a different vendor. It costs over 1k less than the Quaife and is equally reliable. Devon can be reached at 800-622-4327 or 714-630-4327 .

As for a Quaife, Devon has some of the best prices on Quaife as well. Just tell him you are a VCA member and that I sent you. He'll take care of you.

Good luck!

Joseph

Oh...actually I called Detriot about their tru trac last year and they couldn't figure out what I needed to put in the viper. I wasn't ready to get one yet so I left it at that. I'll call devon tomorrow and get the scoop.... I used the true trac in other cars and it worked great.
 

MikeR

Viper Owner
Joined
Jul 10, 2006
Posts
1,529
Reaction score
0
Oh...actually I called Detriot about their tru trac last year and they couldn't figure out what I needed to put in the viper. I wasn't ready to get one yet so I left it at that. I'll call devon tomorrow and get the scoop.... I used the true trac in other cars and it worked great.

Quit being a ****** nozzle and go get a Quaife with the gears all set up and ready to go from Parts Rack. Then you can keep up with me.......:lmao:

Otherwise sit at home and :dig::hitfan:
 

BLWNGTS

Enthusiast
Joined
Dec 1, 2005
Posts
258
Reaction score
0
You know... everytime I hear of you two monkey racing on our "track" I think back to the Camaro days... and a single song keeps popping up in my head....
"back in the saddle again..." but for some reason I replace saddle with SLAMMER!!
:D
 

BLWNGTS

Enthusiast
Joined
Dec 1, 2005
Posts
258
Reaction score
0
Quit being a ****** nozzle and go get a Quaife with the gears all set up and ready to go from Parts Rack. Then you can keep up with me.......:lmao:

Otherwise sit at home and :dig::hitfan:

Aren't you happy you installed his supercharger now Smoke?!?!?
:rolaugh:
 
OP
OP
I

ILLSMOQ

Enthusiast
Joined
Nov 27, 2005
Posts
1,885
Reaction score
0
Location
SAN JOSE, CA
THANKS MikeR :quack: Boplaw had a set of 3.55's laying around that he never got around to installing...so I took them off his hands. thanks Bobby.......So MikeR :quack: enjoy your reign as king... though it will be brief .:2tu:
 

MikeR

Viper Owner
Joined
Jul 10, 2006
Posts
1,529
Reaction score
0
THANKS MikeR :quack: Boplaw had a set of 3.55's laying around that he never got around to installing...so I took them off his hands. thanks Bobby.......So MikeR :quack: enjoy your reign as king... though it will be brief .:2tu:

The 3:55's will be too much, but not enough of a difference over 3:33's.

Take 3:07 and 3:33 you got plus :26, now take 3:33 and 3:55, plus :22, divide that by the fact that the 3:55's wont hook up, multiply that by the fact that you have to shift to soon, divide that by the fact you drive like a Grandma and then you should still be a half car back.:2tu:
 
OP
OP
I

ILLSMOQ

Enthusiast
Joined
Nov 27, 2005
Posts
1,885
Reaction score
0
Location
SAN JOSE, CA
The 3:55's will be too much, but not enough of a difference over 3:33's.

Take 3:07 and 3:33 you got plus :26, now take 3:33 and 3:55, plus :22, divide that by the fact that the 3:55's wont hook up, multiply that by the fact that you have to shift to soon, divide that by the fact you drive like a Grandma and then you should still be a half car back.:2tu:


hmm...well all I can say to that is, take this VIDEO and shove it up your ....

You must be registered for see images attach


You must be registered for see images
You must be registered for see images
You must be registered for see images


like I said MikeR:quack:..enjoy the crown while you have it!!!
You must be registered for see images

You must be registered for see images
 

MikeR

Viper Owner
Joined
Jul 10, 2006
Posts
1,529
Reaction score
0
In the words of our friend BLWNGTS..... I retire Champ!!! hahaha
 

Camfab

Enthusiast
Joined
Oct 2, 2004
Posts
2,916
Reaction score
3
Location
SoCal
What I've never heard is anyone installing a "Detroit Locker" in a Viper. Anyone have some real info? I know they are not the best choice for a road course, but they are great for drag racing and are bullet proof. So what's up, anyone?
 
OP
OP
I

ILLSMOQ

Enthusiast
Joined
Nov 27, 2005
Posts
1,885
Reaction score
0
Location
SAN JOSE, CA

steponz

Enthusiast
Joined
Sep 10, 2006
Posts
441
Reaction score
0
Location
Tampa, FL
3.55 isn't bad at all with the paxton...

Been there, done that...

I'll laugh when he beats you...hehehehe

Joe
 

treesnake

Enthusiast
Joined
Jan 19, 2006
Posts
2,288
Reaction score
2
Location
St.L
I didn't have any problem getting a new Quaife (w/333 gears). I exchanged a Quaife loaded housing for my OEM.. I will be getting it anyday. Hoping to get it installed before the car leaves for A.P. Engineering.

After driving another 06 with a Quaife, I went looking for another as soon as I got this car. Liked it so much I put one in my '01.

I got my Quaife from Michael Nouri at XVIPERS INC he did have several more, both gen 2 and 3. Several ratios also.

The price varies depending on several factors. I did some body panel trading for my Quaife. If interested you will need to contact him for pricing.
 

Joseph Dell

Enthusiast
Joined
Oct 2, 2000
Posts
3,463
Reaction score
0
Location
Atlanta, GA 30338
I didn't have any problem getting a new Quaife (w/333 gears). I exchanged a Quaife loaded housing for my OEM.. I will be getting it anyday. Hoping to get it installed before the car leaves for A.P. Engineering.

After driving another 06 with a Quaife, I went looking for another as soon as I got this car. Liked it so much I put one in my '01.

I got my Quaife from Michael Nouri at XVIPERS INC he did have several more, both gen 2 and 3. Several ratios also.

The price varies depending on several factors. I did some body panel trading for my Quaife. If interested you will need to contact him for pricing.

Ahh... one of the vendors who offered to do the GB but then backed down... He isn't a site sponsor either and didn't want to shell out the $200 to become one for 6 months. (that's 200 total for 6 months). At least the other vendor paid the VCA sponsorship fee and then decided that they wouldn't/couldn't do the GB.
 

BLWNGTS

Enthusiast
Joined
Dec 1, 2005
Posts
258
Reaction score
0
hmm...well all I can say to that is, take this VIDEO and shove it up your ....

You must be registered for see images attach


You must be registered for see images
You must be registered for see images
You must be registered for see images


like I said MikeR:quack:..enjoy the crown while you have it!!!
You must be registered for see images

You must be registered for see images

Hahaha... that video makes me laugh... and here is one of MikeR kickin Smoke he is down... Mike... is that you laughing at his car!?!?!:dunno:

You must be registered for see images attach
 

99 R/T 10

Enthusiast
Joined
Jun 4, 2001
Posts
10,314
Reaction score
0
Location
Enterprise, AL USA
Ahh... one of the vendors who offered to do the GB but then backed down... He isn't a site sponsor either and didn't want to shell out the $200 to become one for 6 months. (that's 200 total for 6 months). At least the other vendor paid the VCA sponsorship fee and then decided that they wouldn't/couldn't do the GB.


Agreed, the dude is a *********. I won't deal with XVIPERs again. :mad:
 

RichieSRT10

Enthusiast
Joined
Nov 15, 2005
Posts
661
Reaction score
0
Location
Crystal River, Fl
I found the 3.33 gear and base Paxton kit to be a great combo. Doug Levin told me this was the route to go and it was a great recommendation. I tried another car with the 3.55 and the first 2 gears were useless.
 

michaelnouri

Enthusiast
Joined
Jul 13, 2007
Posts
124
Reaction score
0
Location
Owensville Missouri 65066
thats funny 99rt10, if i was not mistaken michael s., i have never sold you anything. you were the one who sold me crap wheels, you sent me two wheels that you claimed could be polished and had tiny scratch. complete junk wheels, i brought them in for a local vca member, we spun them on a hunter machine and they were bent so bad.
 

Joseph Dell

Enthusiast
Joined
Oct 2, 2000
Posts
3,463
Reaction score
0
Location
Atlanta, GA 30338
Mike was nice on the phone, but I think he got the shaft from a vendor that prevented him from delivering. Which is unfortunate b/c we all then suffer.

details.
 

99 R/T 10

Enthusiast
Joined
Jun 4, 2001
Posts
10,314
Reaction score
0
Location
Enterprise, AL USA
Funny, because when I had them spun they were straight and I told you that they were refurbed wheels to begin with. What ever............
 
OP
OP
I

ILLSMOQ

Enthusiast
Joined
Nov 27, 2005
Posts
1,885
Reaction score
0
Location
SAN JOSE, CA
Hahaha... that video makes me laugh... and here is one of MikeR kickin Smoke he is down... Mike... is that you laughing at his car!?!?!:dunno:

You must be registered for see images attach


haha...yeah yeah yeaaah.... ..!..
 

treesnake

Enthusiast
Joined
Jan 19, 2006
Posts
2,288
Reaction score
2
Location
St.L
I didn't have any problem getting a new Quaife (w/333 gears). I exchanged a Quaife loaded housing for my OEM.. I will be getting it anyday. Hoping to get it installed before the car leaves for A.P. Engineering.

After driving another 06 with a Quaife, I went looking for another as soon as I got this car. Liked it so much I put one in my '01.

I got my Quaife from Michael Nouri at XVIPERS INC he did have several more, both gen 2 and 3. Several ratios also.

The price varies depending on several factors. I did some body panel trading for my Quaife. If interested you will need to contact him for pricing.

Sorry, wasn't trying to stir up anything. I just wanted to pass on to every one a contact for getting a new Quaife. Seems they are hard to come by.

Mike at XVIPERS helped me get my current 06 coupe. He is buying the body panels off the car after Jeff removes them. He "threw in" and installed a Corsa track exhaust and a shifter. He is also arranging the transportation to and from A.P. Engineering next week and arranging the transportation of both my cars to VOI. He is trying to get my Quaife "rushed" so I can get it installed before it leaves. Oh, and he stopped his "convertible to coupe" conversion (that is really cool, yellow convertible to SSG coupe) to install my Eibachs and JONB's spring caps.

The only problem I am having with him is that he is dangling a Ford GT under my nose...If you want to call that a problem.
Sorry to hear some guys had a problem.
 
OP
OP
I

ILLSMOQ

Enthusiast
Joined
Nov 27, 2005
Posts
1,885
Reaction score
0
Location
SAN JOSE, CA

Flash1034

Enthusiast
Joined
Oct 26, 2006
Posts
632
Reaction score
0
Location
San Juan Capistrano, CA
So whats wrong with the new diff in the 08s? I know the Dana Hydra-Lok rear end was a POS but I thought the new 08 diff was supposed to be a nice unit?

Flash
 

Latest posts

Members online

Forum statistics

Threads
153,647
Posts
1,685,252
Members
18,227
Latest member
Kkustelski
Top