K&N air box question

Ulysses

Enthusiast
Joined
Oct 2, 2000
Posts
3,414
Reaction score
1
Location
San Diego, CA. USA
In theory you will gain a little. What it does, besides isolating the external air from the hot air of the engine compartment, is that it deletes the water block that drops down from the stock box. Thus allowing a less turbulent flow of air through the filters.
 

ACR Joe

Enthusiast
Joined
Oct 6, 2000
Posts
843
Reaction score
0
Location
Newtown, PA
I would add to Ulysses' post, that the same effect can be achieved by simply removing the H2O deflector from the stock air box. I modified mine and it works quite well; much more pronouinced intake sound; unquestionably better charge air flow. Check the archives. Someone posted photos of a modded air box not too long ago.
 

RickV2K

Enthusiast
Joined
Feb 19, 2001
Posts
139
Reaction score
0
Location
Wisconsin
removed rain baffle and noticed about a 4½ hp gain on dyno. could be + or - but there abouts.
 

John Myrick

Enthusiast
Joined
Nov 13, 2000
Posts
88
Reaction score
0
Location
Sugar Land, Texas
I'm not sure you will see any more horsepower. I got ~+20 rear wheel horsepower after adding the K&N airbox to an otherwise stock 97 GTS. Lots of others state that they saw about the same gain from the smooth tubes and K&N's. Lots of intake noise... You can see the filters through the NACA scoop... Got mine from Carparts.com
 

RickV2K

Enthusiast
Joined
Feb 19, 2001
Posts
139
Reaction score
0
Location
Wisconsin
same principle as the smooth tubes........correct? less air turbulence in both cases. case closed.
 

Matt M PA

Enthusiast
Joined
Oct 2, 2000
Posts
1,582
Reaction score
0
Location
Langhorne, PA USA
If memory serves me...the K&N airbox includes a pair of tubes with an "S" curve in each. I would think that using smooth tubes, K&N filters...then removing the water baffle...would make the most direct path to the throttle bodies.
 

JonB

Legacy\Supporting Vendor
Supporting Vendor
Joined
Dec 8, 1997
Posts
10,325
Reaction score
45
Location
Columbia River Gorge
HP is indeed available for the taking.......


<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by ACR Joe:
I would add to Ulysses' post, that the same effect can be achieved by simply removing the H2O deflector from the stock air box. I modified mine and it works quite well; much more pronouinced intake sound; unquestionably better charge air flow. <HR></BLOCKQUOTE>

In addition that very nice and effective HMS Carbon Airbox, PartsRack is offering some "IRS REFUND SPECIALS" on the supplier page. One of these is an Un-baffled OEM new airbox!. Professionaly done, and cost-effective.

As with ALL un-baffled boxes, K+N, HMS, and OE, care should be taken to slow down or even park under a bridge overpass if you get caught during any torrential downpour!
 

Chuck 97 GTS

Enthusiast
Joined
Oct 2, 2000
Posts
633
Reaction score
0
Location
Illinois
Jon, what material do you use to cover the hole left by removing the baffle? Plastic? Aluminum sheet?
 

Matt M PA

Enthusiast
Joined
Oct 2, 2000
Posts
1,582
Reaction score
0
Location
Langhorne, PA USA
Jon...what could someone expect in terms of SOTP feel, HP, etc., by taking out the water baffle...or buying one modified from you? I already have the K&Ns and smooth hoses. Thanks!
 

Latest posts

Members online

Forum statistics

Threads
153,644
Posts
1,685,209
Members
18,220
Latest member
ROIII
Top