Lowering kit for the seats - measures?

[CS14]

Hi guys

Have anyone the measures on the 2" lowering kit for the seats? I need height and length on the front and rear pieces.

 

[dave6666]

Sounds like are building your own?

 

[CS14]

Yepp, cant be difficult to manufacture my own. The measures I need is for the Gen1 seat.

 

[VYPR BYT 94]

Can't believe I didn't write down the heights before the install... thought I had it somewhere.
I did find this in my notes though...

GEN 1 has a 3.5" longest base.....
Gen 2 has a 5.5" longest base...

GEN 1 are 3.50 long on the long bracket with the tall Standoff.
GEN 2 are 5.50 long on the long bracket with tall standoff.

From Memory;
Gen1 - I think the backs were approx .750" high and the fronts approx 1.50" high.

You must be registered for see images attach

NOTE:
I added about a 5/8" spacer or so to the fronts to give the seat a more comfortable tilt. I suggest you experiment with different tilts / spacers under the fronts before making anything permanent. Your legs will thank you.

Mike

 

[99 R/T 10]

If anybody has the direction to install the kit, can you post them up here? My brother has a kit, but doesn't have the directions. I figured they would be self explainitory, but written directions are always helpful.

 

[Stretch]

I made my own a while back. Didn't really take measurements, just eye balled it based on the seat tracks that were being removed. Here is the write up:

http://forums.viperclub.org/threads/642448-Finally-lowered-my-seat!