ACR Larry
Enthusiast
I am looking for a local trailer dealer in Southern California. Any ideas?
Need Trailer in So Cal
- Thread starter ACR Larry
- Start date
ACR Larry
Enthusiast
I'm having a hard time finding a trailer that will allow me to open my car door after loading. Most dealers tell me to drive up on planks so the door will clear the traler wheel. I really don't want to do that.
Larry, Check out these two links, I think they will answer all of your questions.
http://vca1.viperclub.org/ubb/Forum14/HTML/013028.html
http://vca1.viperclub.org/ubb/Forum14/HTML/011574.html
http://vca1.viperclub.org/ubb/Forum14/HTML/013028.html
http://vca1.viperclub.org/ubb/Forum14/HTML/011574.html
REDSLED
Enthusiast
Az-Tex trailers in Romoland, CA. 909-928-6683(20 miles west of Hemet) 8.5 X 16.5' car hauler with tilt drivers fender (so you can open the door to get out) 6ft. loading ramps, D rings, storage box, $1600 out the door. JoeB 01, So Cal Rebell and myself all bought the same trailer. The price can't be beat.
Hope this helps
-Jonathan
Hope this helps
-Jonathan
Dale Craig
Enthusiast
Larry,
I have a Sloan Kwik Load trailer and I think it could be the answer for you. My Viper is lowered about 3/4 inches and I can still open the door when the car is on the trailer. It's close but it does clear the fender. The nice thing about these trailers is when you load the car; the fenders are never in the way (they slide out of the way). I also load the Z06 sometimes on the same trailer and I have to remove the fender to open the door after that car is loaded. This is not a big problem; the trailer has aluminum fenders that come off with two wing nuts. On and off in a couple of seconds. Hope this helps.
Dale
I have a Sloan Kwik Load trailer and I think it could be the answer for you. My Viper is lowered about 3/4 inches and I can still open the door when the car is on the trailer. It's close but it does clear the fender. The nice thing about these trailers is when you load the car; the fenders are never in the way (they slide out of the way). I also load the Z06 sometimes on the same trailer and I have to remove the fender to open the door after that car is loaded. This is not a big problem; the trailer has aluminum fenders that come off with two wing nuts. On and off in a couple of seconds. Hope this helps.
Dale
ACR Larry
Enthusiast
Thanks for all your help. I ended up with the Sloan Kwik load trailer. Ed at ESE Enterprises Inc provided excellent customer service and the trailer is perfect for the Viper.
Larry
Larry
SoCal Rebell
Enthusiast
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by ACR Larry:
Thanks for all your help. I ended up with the Sloan Kwik load trailer. Ed at ESE Enterprises Inc provided excellent customer service and the trailer is perfect for the Viper.
Larry
<HR></BLOCKQUOTE>
Larry how much $$$ did it cost?
Thanks for all your help. I ended up with the Sloan Kwik load trailer. Ed at ESE Enterprises Inc provided excellent customer service and the trailer is perfect for the Viper.
Larry
<HR></BLOCKQUOTE>
Larry how much $$$ did it cost?
ACR Larry
Enthusiast
Ron,
The price was $2995. More than the standard trailer you can get at AZ trailer but less than other tilt trailers. It was a good middle of the road solution for me.
The price was $2995. More than the standard trailer you can get at AZ trailer but less than other tilt trailers. It was a good middle of the road solution for me.
Similar threads
