Oil pan advice

[Christiman]

Need some advice from u pros. I'm puting a 04 srt10 viper motor in a 61 Chrysler. The oil pan drops Down about 10" in the back. I need to put a pan on that don't drop down. I tried a viper car pan but it's too short and narrow. Is ther a pan I can use and if so which one?

 

[yotehunter]

There are not many options for pan styles for the V10, should not be to much trouble for someone in the know to make a custom pan using one of the originals as a starting point.

 

[DrumrBoy]

Dry sump it, no drop at all!

 

[Mopar Steve]

Need some advice from u pros. I'm puting a 04 srt10 viper motor in a 61 Chrysler. The oil pan drops Down about 10" in the back. I need to put a pan on that don't drop down. I tried a viper car pan but it's too short and narrow. Is ther a pan I can use and if so which one?

From your post, I am guessing you are using a Ram SRT-10 engine. The corresponding year car engine will fit correctly and not drop down as far. The earlier year car pans are not interchangeable. You will also need to get the sump/pick up assembly inside the pan.