georgethedog
Enthusiast
Has anyone had any luck painting (or taking off and painting) the side and rear emblems on the SRT-10? The prices for new ones are... well, stupid. Just curious. Thanks.
Painting emblems on SRT-10
- Thread starter georgethedog
- Start date
QUICKSRT10/SRT8
Enthusiast
- Joined
- Mar 1, 2009
- Posts
- 1,035
- Reaction score
- 0
I just replaced my side emblems for $30 a piece I thought that was cheap
F
FrgMstr
Guest
Where did you get side emblems for so cheap?
georgethedog
Enthusiast
I sent you a PM.
cubican
Enthusiast
I just did them in black the rears where 30 bucks and the sides where 56 bucks. just do a search on dodge oem parts on the net. if your going with black remember to order a set for 06 thats the last year for the black ones on the sides.
georgethedog
Enthusiast
Would someone please PM me with where you got them so cheap. Thanks a bunch. I can't find them on the net and I have been quoted well over $350 for the set. I can't afford to spend that on emblems.
VicTxV10
Enthusiast
I'll send you a PM. I just got two of the side emblems for $58 each.
That's not the norm! the emblems are around $180 ea. I just replaced all the emblems on mine and I paid alot for them. NOT CHEAP!!!
cubican
Enthusiast
I did all of them for 175, do a serch and then call them. there is many many oem dodge parts houses.
Y2K5SRT
Enthusiast
Certain colors are more expensive from Mopar, such as black. And different years came with different colors. Example: The black 2003 SRT-10 came with black side badging. MSRP: $172 each for the SRT-10 side badges (note the dash between SRT and 10, which was later dropped) - dealer cost is over $100 each. The black 2006 SRT10 came with silver side badging. MSRP: $76.45 each for the SRT10 side badges (no dash), with dealer cost closer to the less expensive quotes above.
Bottom line: The earlier cars are generally priced higher and in some cases you don't have much of a choice if you want that exact side color, such as black. Heck, if anybody has a later car with factory badging in black please drop me a PM. On the other hand, if you want silver side badging you can go with a later year and save some serious coin. Mind you, it won't have the "dash" so a purist might notice they aren't original to the car, but that is about it. Check with any Mopar dealer such as Woodhouse, Tomball, Viper Parts of America, etc. for pricing. Most will offer VCA discounts too.
Bottom line: The earlier cars are generally priced higher and in some cases you don't have much of a choice if you want that exact side color, such as black. Heck, if anybody has a later car with factory badging in black please drop me a PM. On the other hand, if you want silver side badging you can go with a later year and save some serious coin. Mind you, it won't have the "dash" so a purist might notice they aren't original to the car, but that is about it. Check with any Mopar dealer such as Woodhouse, Tomball, Viper Parts of America, etc. for pricing. Most will offer VCA discounts too.
QUICKSRT10/SRT8
Enthusiast
- Joined
- Mar 1, 2009
- Posts
- 1,035
- Reaction score
- 0
That's not the norm! the emblems are around $180 ea. I just replaced all the emblems on mine and I paid alot for them. NOT CHEAP!!!
I wanted to change my silver emblems the blue to match the car so I ordered the VOI 9 emblems and got them from the dealer my dad works at
georgethedog
Enthusiast
Thanks for all the information and the PM's everyone. Looks like I have some places to check. If I am going to talk the wife into dropping bucks into the Parts Rack rollbar setup, I have to try to save elsewhere and a couple hundred here will help.
Slithr
Enthusiast
If I am going to talk the wife into dropping bucks into the Parts Rack rollbar setup, I have to try to save elsewhere and a couple hundred here will help.
This should be a slam dunk... after all, it's about the safety of her honey
I would like to get the same rollbar (I thnk Autoform) in chrome
cubican
Enthusiast
If you tell them that your car is an 03 the prize goes up, for the rears you can used 08-09 for the side ones 06. Thats for the black ones. I had to call to get the correct ones.
lilgookiemonsta
Viper Owner
- Joined
- Jun 11, 2010
- Posts
- 143
- Reaction score
- 0
Can someone PM where to buy the badges too? I've been dying for them!
Y2K5SRT
Enthusiast
You will find that most authorized Mopar dealers treat VCA members very fairly: Woodhouse, Tomball, etc. As these are Mopar parts that is probably your best bet for the best prices.
Harley561
Viper Owner
I bought my black side emblems from Viper Parts of America. $135 per side before the member discount.
https://www.viperpartsofamerica.com...10-viper-srt-10-black-side-badging-0wn81px3ab
https://www.viperpartsofamerica.com...10-viper-srt-10-black-side-badging-0wn81px3ab
Attachments
Last edited:
TowDawg
Enthusiast
That looks pretty damn good! It's about time for my rocker panels to be repainted anyway, and I think the black lettering might look pretty good on a silver car.
lagalaxy13
Viper Owner
At that price I'd finally get a set of black ones for the side of mine, my rears are black but sides are still red. but at over $300 it wasn't worth it for a sticker.
georgethedog
Enthusiast
Talk to Jon B at Parts Rack.
F
FrgMstr
Guest
I bought mine from Viper Parts of America, checked with JonB, they could not meet the price. He said it was under his cost. Here is what those look like one. Happy with it.
You must be registered for see images
georgethedog
Enthusiast
intense5.5
Enthusiast
I've been holding off painting my sidesills because of the added cost of the emblems. Even at $135 each you're still at almost $300. Damn, they're just plastic 
.
.
F
FrgMstr
Guest
I've been holding off painting my sidesills because of the added cost of the emblems. Even at $135 each you're still at almost $300. Damn, they're just plastic
Ask VicTxV10 where he got his. I would like to know as well.
cubican
Enthusiast
Pic of my side decal with out the srt-10 on it.
You must be registered for see images attach
VicTxV10
Enthusiast
FrgMstr and intense5.5, PM sent..
Similar threads
