Part #, $, etc. for center cap removal tool?

[slaughterj]

Any info on the part #, $, etc. for the center cap removal tool would be appreciated...

 

[Janni]

Free - from me - it's in the toolbox in Texas right now, but when we get back you can have it.

 

[Hoosier Daddy]

Use a small flathead screw driver. Wrap the tip in cloth and pry away!! If you can't wait until then. Unrelated to this. What year in college do attorneys loose common sense? Inquiring minds want to know!

 

[ViperJoe]

Craftsman 1/4" flatbladed screwdriver and an old Hanes T shirt. That's what I use

 

[dblankenbaker]

Janni, you should really sell it... those things are expensive! I had one disappear at ViperDays a few years ago. :-( Replaced it with a small Craftsman screwdriver, and used a propane torch to get the same bend in the tip.

 

[Chuck 98 RT/10]

When removing the centercaps use a piece of electrical tape on the rim so the tool prys against the tape and protects the rim.

 

[jcaspar1]

I use the end of a wooden clothes pin sanded down a bit. No way it can scratch and easly to replace when it breaks.

 

[1TONY1]

When removing the centercaps use a piece of electrical tape on the rim so the tool prys against the tape and protects the rim.

me = small screwdriver with electrical tape on the end.

 

[Mopar Steve]

M.A.B. paint stores give away a paint can opener that looks exactly the same. Loop type handle and curved tip. works great.

 

[Newport Viper]

electrical tape, put it on the wheel

 

[rhansenjr]

My car came with the tool included in the vinyl pouch with the owners manual.

 

[Qualitywires.com]

Use a small flathead screw driver. Wrap the tip in cloth and pry away!! If you can't wait until then. Unrelated to this. What year in college do attorneys loose common sense? Inquiring minds want to know!

To go along with John's question...how do I wash my car? j/k! ha!

 

[MaxedGTS]

Free - from me - it's in the toolbox in Texas right now, but when we get back you can have it.

That's a very nice offer. i would jump on it because that darn tool costs over 40 bucks!!!!

Max

 

[slaughterj]

Free - from me - it's in the toolbox in Texas right now, but when we get back you can have it.

Thanks for the offer, I can pay though

 

[slaughterj]

Use a small flathead screw driver. Wrap the tip in cloth and pry away!! If you can't wait until then. Unrelated to this. What year in college do attorneys loose common sense? Inquiring minds want to know!

Grrr, I find that using a small flathead screwdriver with cloth coverage gets to be too thick, else the screwdriver pierces the cloth, so that hasn't worked well for me...

 

[slaughterj]

Free - from me - it's in the toolbox in Texas right now, but when we get back you can have it.

That's a very nice offer. i would jump on it because that darn tool costs over 40 bucks!!!!

Max

What?! I thought it was ~$20?!