Part# for rear diffuser fins?

[viperbob]

Anyone know what the part#s are for the 4 Black fins (diffusers?) that attached to the bottom of the rear bumper?

 

[Racer Robbie]

My 2003 breakdown does not show the fins as a seperate item.

5290 137AD BELLY PAN, Extension Rear Qty. 1

You can see parts breakdowns on our web site at:

http://www.members.aol.com/AtroRacingTeam/PRODUCTS/AtRoRacingsProductCatalog

Robbie​

 

[Lee00blacksilverGTS]

Call Chuck Tator 914.763.3136

 

[Viper Wizard]

Robbie is right on the part #, 5290137AD MSRP $345.00 [12 left in DC stock]
It is a complete assembly with all four fins.
Less 20% VCA
914-763-3136

 

[SCLSSRT10]

Viper Bob,
Call Autoform, replace the stock plastic ones with their Stainless steel strakes. They look much better than the stock ones. If you still want the stock ones, I may have my originals that I replaced with the SS ones from Autoform. Send me a PM to let me know if you are interested. I will look to see if I still have the stock strakes.

Steve
SCLSSRT10

 

[Viper Wizard]

Steve the stock fins are NOT plastic! They are aluminum.

 

[viperbob]

Very true...and they can bend if you are not careful, especially if your car is lowered.

 

[ILLSMOQ]

..........bend them back.

 

[JB/SRT]

Chuck, sent you PM.

Jim

 

[viperbob]

Hey SCLSSRT10 - I sent you a PM.

 

[Racer Robbie]

and the aluminum fins are a lot lighter than the stainless steel ones. Remember lighter is faster and lighter is free HP.

 

[Racer Robbie]

Anyone know what the part#s are for the 4 Black fins (diffusers?) that attached to the bottom of the rear bumper?

I found this web site where you can buy a used rear diffuser.

http://www.viperpartslarry.com/genIII.htm